rod

hello good afternoon everyone i'm new to the forum i had a ducati 1199 panigale of 2013 and with 12800 km i had the misfortune of a connecting rod drilling the block engine and locking the rear wheel, good if anyone knows of a good engine condition I can buy it can also be a 1299, ducati told...

Hey everybody, It appears my 2013 Ducati 1199 Panigale is leaking from the clutch slave push rod hole. I brought it into an authorized Ducati shop and they say it appears to be leaking from the push rod hole. They said there is a gasket that is there that is installed from the INSIDE of...

My 2016 1299s is in the shop, and they're telling me that the "bolt on the counter shaft shift rod is seized" and it will take 2 labor hours to repair. And that this is "fairly common on these bolts due to the lock tight used by Ducati." This makes no sense to me. Has anyone experience this...

Does anyone know of a good place in southern California to get connecting rods installed? I'm looking to replace the stock rods in my 899 with some CP Cariilo rods and was hoping someone could recommend a good shop that works on Ducati's. Thanks!

For you technology enthusiastic: Today I had a 1199R connecting rod in my hands. Not in it's final shape, but the raw piece after the forging process. Amazing piece of art in Titanium. They are made in Switzerland for Pankl. Connecting rod and rod cap are forged as one piece and splitted later...

I just noticed some movement on my DQS shift rod on my 1199. I am not sure if this is normal. I have had a look at other pictures on the net and the hex bolt is there as it is supposed to be but there is this lateral movement at the top joint.

I need a OEM shift Rod for a 899. If you have one please drop me a note. Thanks -

I have play in the front tie rod end (rose joint) of my rear shock (Showa; 1199 ABS Base). Ducati do not supply a replacement part for this, and their solution is to replace the entire shock at over £1000. Madness for a removable part! Does anybody know the correct size of rod end to...

Anybody got any insight? During the race build they installed Lightech rearsets which converted the bike to GP shifting while keeping all the OEM sensors/etc. I need to move the shift lever down, but can't seem to get it done. On all my other ones, you break the nuts on both ends of...

2012 1199s abs. 13k miles So after doing my oil change, new crush washer, new filter and o rings, new tires, coolant flush, new brake and clutch fluid....I have an oil leak. Here's what I did... I did the above.. But I did a chain and sprocket service. I took the slave off to get the rubber...

Does anyone know how much free play I need for the master cylinder to release the pressure? I want to adjust mine after I've adjusted the lever position on my new rearsets (Gia Moto) so it's as tight as possible while still being safe

Any damaged or used 1199 lever, but must have the little Push Rod that goes into the Master Cylinder. Thanks!

Rider hurt his shoulder. No info on the bike, stock motor, pipe, ecu.....

Hey guys. So Sebastian hasn't given me a final official estimate but he tells me by looking at the internals it is "well over $5k" in damages. Now, I know there are a bunch of engines on Ebay but I wanted to look at some other avenues as well and reach out to you guys here and see if anyone...

Hey, I'll take that bait. It was entertaining. I have me a new batch of popcorn. Keep posting | | | V The story so far: Art posts he's thrown a rod and wonders that, since he didn't have service done at an authorized Duc Dealer...."Am I screwed"? Assured that current warranty law prevents...

Closing a thread arbitrarily smells like censure to me. What does it matter what people in a thread say as long as they keep on talking? Does it have to make sense to the censors? I am very disappointed. While you are it why do you not just kick me out of this Forum (even though it was not my...

At OP's request, I have closed and moved the "threw a rod" thread to the thread boneyard. Chris

Saw a nice looking Harley night rod special edition tonight while I was riding the pani. Now I kind of want one.....not to replace the pani...so don't worry...lol. Looks like it would be fun as a commuter bike though. Anyone have any experience with them? How are they in traffic...

SATO RACING | Suspension Link Rod - Ducati 1199 Panigale Any suspension guru's care to comment on lowering the rear by 20mm?

Today I saw an advertisement for a suspension link rod to replace the troublesome stock units on the 1199. No price shown but a picture of the piece can be seen on page 8 of the Jan '13 issue of Sport Rider magazine.