sag

Hey guys, have a new to me 20 V4, but for some reason I find this bike to be very hard to turn. For a backstory I will say my friends have a 2019 V4S and at one point in their early setups I thought that bike turned in way to easily. I suppose the updates for 2020 remedied that instability. But...

Setting Sag I'm running 31mm Total Sag per Ohlins suggestion of ~30mm (R1-R3) I see that some are only accounting for the difference between Static and Rider and arriving at 30mm (R2-R3) resulting in a much greater Total Sag measurement I'm mainly trying to understand how most people are...

Hi My new monster 1200R manual says the rear sag should be set at 12mm and spring length set to 158mm Does anyone know if this spring measure means with bike on the ground or shock unloaded? And does anyone know where the 12mm measurement is taken From? Thanks

I know to adjust rear sag, you just adjust the big spring on the side. I thought maybe for front, move the Adjuster nuts on top of the triple clamps, but that doesn't make sense to me. What do I adjust for the front sag? Keep in mind this is an S model with the electronic suspension if that...

So I had the front sprocket installed with same chain. While the mechanic was doing that, I asked him to put the swingarm link to "P" from "F". He did it. But we noticed the seat height dropped like 2-3"!! So much that bike's kickstand was holding the bike almost vertical, which isn't good. Did...

What reference point on the bike are you guys using when setting rear shock sag? After that, gonna move on to these: note: for the rear setup, by clockwise I am standing at the rear tire facing forward to the front end. When adjusting rear compression (red dial with flat tip screw on...

Some quick info needed please: 1) What is the approx static sag for an 1199S/Tri - it should be same from bike to bike - yes? 2) How many 360 turns are there from full out min, to full in max preload? FWIW, I'm at 5-turns out from max, giving me a rider sag of 13mm. Just looking for...

Anyone have some numbers to start with and fork height in the trees? I'm on factory ohlins that will have sbk valving and sprung for my weight. Thanx

[/URL][/IMG] hi guys been waiting ages for my dealer to stock up this tool,without much luck,so I 've done the next best thing! I've owns my "S"for quite a while & i 've not set my preload,70kg without my suit,what u guys recommend? manage to get some information from other forums, take...

Does anybody know what is the standard SAG? I heard Ducati used something different from the usual 75 kg (167 lbs). Thanks

Can you set front sag with bike on rear wheel stand?? Or does this put too much weight on the front end??

I would know your preferences or informations about the SAG static for front and rear suspensions. In general, this measure depends by use. For street it must be more than for race use. Furthermore these values are connected to the race SAG (measured with driver on motorbike) and consequently...

Can you get right sag numbers from the Ohlins suspension weighting 200 fully geared?

Just curious if anyone have their bikes delivered without the C wrench for rear shock adjustments, i'm running on a base with abs and i realise my toolkit got no C wrench, which i think came on almost all my bikes.

Hey guys just wondering if anyone can tell me what the rate of the stock front springs are. Also what is the factory recommending as far as sag settings go? Thanks Pete