setting

On the V4R rear shock absorber the manual asks for adjusting the shock eye to eye dimension to 315mm when installing the Akra race exhaust system The manual also says that the groove on the lower rod eye thread is supposed to be lined up "just showing" with the lower nut as maximum, but by...

Hi guys, I've reversed the shift pattern to be GP shift style - 1 up, 5 down - and am wondering if / how to reverse the DQS operation, so it's not blipping the throttle on upshift etc. I don't seem to see it on the menu. Anyone know ? Thanks Robert PS - also I note slight...

Hi guys can someone tell me the torque setting for the bolt shown in the pic please? SEE HERE Many thanks :)

Hi My new monster 1200R manual says the rear sag should be set at 12mm and spring length set to 158mm Does anyone know if this spring measure means with bike on the ground or shock unloaded? And does anyone know where the 12mm measurement is taken From? Thanks

I have been running Tuneboy on my 2016 1299 standard for around a thousand miles now and I finally decided to try the linear torque setting. It's really great. Very smooth throttle response, no dip in power delivery anywhere. I commute to work every day on the Pani and with the linear torque and...

After much head scratching was wondering why after 500 miles there were no values in the software tables for my auto-adaptivity feature (all zeroes), then realised it comes set to start recording at 6000 rpm. Rapid Bike told my UK distributor that this is because at lower RPM, this AA feature...

Hi. I'm waiting to take delivery of my new Panigale R and wounder IF some one know the shim stack setting in the fork and shock? Are they different than Ohlins Nix30 cartridge and aftermarket TTX shock? I'm gonna use minne for racing 2weeks after delivery so I'm trying to find out so much I...

Guys I know (because I read them) there are other threads on this forum that discuss exactly what I'm about to ask but for the last two days I've searched and finally resorted to just asking. I have a new set of track fairings coming and was curious about a few things. I've seen several...

Just purchased a Hero Black, initially using default 1080p 30fps ultra wide, was planning on trying out 1080p 60fps medium wide view, have tried helmet & triple clamp mount. Any advice from experienced users greatly appreciated, helmet was good except I had bad angle & I could feel the wind drag

New member here on the forum. Wanted some suggestions on setting up my 1199r for track only. Main or must have mods, body work, speaking of which I have a set of amour bodies complete set for s1000rr, custom paint, pm me and I will send pics. $400. But any way I need body work! rear sets...

I just ordered a set of Dunlop Q3s to replace the OEM rubber (stock size up front, 195/55 out back). I got tired of replacing over-priced tires every 1000 miles of road riding. For those of you that have done the same, I would value you insights from running these tires in fast, road-riding...

Want to change my suspension settings but can't remember how to get into the settings section. If I hold the button in the left handlebar it goes into changing the riding mode. But how do I get into the settings to change the suspension?

I know I know... a lot of you have talked about it before. Just want to get my suspension rebound and dampening set somewhat close. Base Model Suspension in Progressive mode I weigh about 150 with full gear. Set sag to my weight, but didn't do rebound and dampening. Just trying to get it close...

Hi, Can someone please give me some simple instructions on how to set the oil level/air gap on the marzochi forks? Cheers

Can anyone here tell me what the stock suspension is supposed to be set at?

22nm

Looking for advice on how to set the suspension to Progressive or Flat.

Quick question guys how much did you guys unthread the link? Thanks in advance.

To My Fellow Members- This will be my last thread for some time, and I will do something I usually do not do - talk about, myself. Sorry about it's length and conent my friends. None of this is meant to sound conceded or brag whatsoever. It is to dispel any myths or negative thoughts...

I took delivery of the bike in Wet mode expecting a lot more than what the bike gave me, switched it to Sport after 30 miles to continue breaking in the motor.. and I still have a disappointed feeling where as the 'soft' power delivery just makes the bike feel too refined and 'soft' (no pun...