shifter

Note: Before I removed shifter, quick shifter operated flawlessly I recently removed the gear shifter on my Panigale to add some lock tight to the pin that mounts it to the rear set. Once I installed the gear shifter back on the bike, my quick shifter doesn't work. Is there some sort of reset...

FOLLOW UP POST Iván lee, córdonas dealer has helped me out to solve this, and will replace my QS The instalation instructions were not very clear, and my QS was not installed in the best posible position. That caused the malfunction. CORDONA is working on making a more clear...

Hello I am new to the awesome world of Ducati. I was able to get my dream bike a few days ago. I picked up a beautiful 2016 Panigale 1299 S. The reason I'm here is to find out how to make the shift buttons on the left hand function. I did buy it used and she only has 4100 miles on her. I have...

What is the problem most of you have ? Recently, when cold I mean in the first 20 min of the ride I have had problems to shift into 2nd 3rd and 4th I push down and it kind of won't go down, feels like an air bubble And some times I have to push harder After this 20 min...

Just replaced the stock quick shifter with the Cordona unit and took it for a short ride, very impressed in how much more seemless shifts are now. Very easy to install, plug and play. I live in the U.S. so ordered from Ivan Lee at 1-604-873-4826 if interested.

Ok Im sure this has been discussed over and over again. So here goes. HM quickshifter or Translogic quickshifter for the 1299? And which other addons from each vendor? Ok go and give me your reviews. Pros and cons and what else is needed with these quickshifters?

So I see that there are or were a number of people who have had issues with the OEM Ducati quick shifter. My question is what specifically has failed with the unit? Is it a hardware issue or electrical issue?

So after doing a little research I decided I could not wait anymore for the Ducati Performance reverse shift kit. I was able to flip the knuckle to the top of the shaft. It looks like Ducati relieved an area on the frame where the quick shifter would hit so there looks to be enough clearance...

Hi all, Seeking some advice if an OEM Ducati 1199r 2015 quickshifter qill work on a 1199 2012 model. I'm aware that the 1199r 2015 QS allows for up and down shift and I'm just looking to get my upshift back. I'm riding a 1199 2012 model and my OEM quickshifter went kaput. Got a offer...

Translogic updated the old unit (new model # as well) to address some of the weak points consumers raised. I just installed one on my R. While I noticed a significant improvement over the OEM module, I would still recommend purchasing aftermarket rearsets prior to adding a Translogic. I did...

Repairing my 899 and i need to replace the gear shifter. OEM is over $100 new Chinese ebay shifter is $17.51 I feel like this is one of those parts that it's ok to go this chinese ebay route. I need your honest opinions, good or bad idea...

I was looking around on the internet for up and down quickshifters for my 2015 S1000R and was looking around to find out whether the base 2015 1299 had a quickshifter that was up and down. I have the 2015 and it doesnt downshift. I know the base 1299 2016's quickshifter was up and down. Maybe...

Hey Guys, Have ordered my V4 for January.... I'm interested to know if everyone uses the quick shifter all the time?? Is the clutch just for standing starts now?? What else do you love about this bike that's new or different?

I recently installed Bonamici rearsets, and struggled to get a good set up using stock shift rods. Needless to say I made many adjustments to the whole set up until I found something that worked. I recently went to the track and was having a shift issue between 3-4 only. It was interrupting but...

Can the delay time for the DQS be changed via the menu. I scanned my manual for my 2015 1299S, but didn't see anything. Upshifts, using the DQS, seem to take a long time for the power to come back on. I can actually shift faster manually than the DQS. This is certainly not the case on my...

Ok I have a problem with my quick shifter today I noticed that When I’m in first changing to second the gear shifter is hard to pull up now I’m finding it hard to drop down gears. I took the bike into the stealership so they could look at it and he told me it must be the way I position my...

Hi does anyone know why my quickshifter becomes Stiff when changing up in the gears it’s only happening on a few occasions It’s not consistent but it happens mostly in first gear changing to second It’s starting to piss me off and also I’m finding it hard to change into neutral when I’m at...

In need of a quick shifter for a 1299s. I ordered one off ebay but it was DOA. Must be for a 1299. 1199 and 899 will not work. Different part numbers. If any one has I will pay next day air. On my way to the track so need ASAP. Thank you. Blade

Hello Guys Just went out and after few kms start feeling the gear pedal acting weird. Saw the bolt falling out but with the cable in front of the bolt I have no space to put the key to screw it. Do you guys know how to do it? Any videos or pics that could help? I tried to unscrew these...

Hey guys I have a bit of a problem. So I installed a set of CNC rear sets and a set of CNC adjustable levers. Now the ABS isnt working and neither is the quick shifter. The abs warning light is on and another warning light is on. Could I have installed something wrong or did something else...