specs

2020 Ducati Superleggera V4 Technical Specifications Superleggera V4 Engine Engine / Desmosedici Stradale 90° V4, lightened, counter-rotating crankshaft, 4 Desmodromic timing, 4 valves per cylinder, liquid-cooled Displacement / 998 cc Bore X stroke / 81 x 48.4 mm Compression ratio / 14.0:1...

Hi all, Looking to verify that I have my terminology correct first off- The piece that the rearset connects to (it has two bolts that go into the engine block and one that secures a clamp around a pin coming out of the swing arm).. I believe this is the "LH/RH PIN SUPPORT", but not sure. If...

Hey guys I'm getting my V4s here in a few days and I got the CNC racing clear clutch cover/pressure plate for it. I just wanted to confirm the torque specs. From my research the pressure plate is 9-11nm and the clutch cover is 3-3.5 Nm. Let me know if this is correct? Thanks in advance

Anyone swapped to a different brembo brake master yet? Just sourced some V4 panigale Stlyema calipers and was told the RCS 17x18/20 would be the ticket, which i have on hand. Putting these on my MV Agusta F3, and (EDIT) 4 30mm pistons, perfecto.

Anybody knows the torque specs for the bleeder valves (master cylinders and calipers) front and rear?

Does anyone have torque specs for the V4 or older Panigales at least? In particular I am looking for front axle nut torque, but other nuts and bolts would be handy too. Thank you

Hello All, Anyone done a Panigale R SSTK or WSBK build from ground up? Couldn't dig up any thread for the same. Also, where does one find SSTK & WSBK parts? Regards, /Manjunath B.S.

Does anyone know what the size specs are for the 3 pressure plate bolts inside the clutch cover on a 2016 1299s? Thanks

Anyone know what the exhaust DB level ratings are for the Japan spec 1199 or 1299? I brought my 1199 over here to Germany with me and I need to be able to pass a sound test of 95-97 DB to even register the bike. The stock exhaust blows 104 DB, my termi slips with DB killers are still over 100...

I'm considering buying superleggera pistons for my once-was-base 1199. Turns out they come in three specifications, labelled A, B, or C options. Can anyone shed any light on what the possible differences may be ? Thanks

Anybody know the valve clearance specs? My bike is no where near the 15k mark but I currently have everything taken apart so I thought I'd check them anyways. thanks!

250 units 215 HP 175 kilos:D F4 RC | MV Agusta

What does this mean? "In addition it has dedicated steering offset geometry which advances the front axle by 5 mm compared to the 1299 Panigale and the 1299 Panigale S (with relative increment of the wheelbase distance from 1,437 mm to 1,442 mm), in order to further increase stability...

Anyone have the torque specs for the 3 allen screws on the top triple tree and the steering nut.

This weekend i will be changing my sprockets and adding a mount. Does anyone know the torque specs for the following 1 the 6 bolts that hold on the sprocket 2 the stem mount thanks for your help

Does anyone know what are the torque specifications for front and rear wheel nuts in foot pounds? Also, where are the best places to purchase the special rear socket and front wheel alignment tool?