tube

Would like to hear opinions... 1299S with 700 miles... Added Termi Evo Slip-Ones, Changed Oil, Changed Air Filter (MWR) and Removed Charcoal Canister When I removed the charcoal canister, I tee-d the coolant over flow to the breath hose line. A few days ago, I noticed some "fluid" coming...

I want to change out the stock grips (too soft/squishy) for some Domino grips. However, the stock throttle tube has raised edges and all that which the stock grips match up to. Any recommendations on an aftermarket throttle tube?

Could someone measure the rubber grommet on the airbox drain pipe going into the fan duct? Big diameter, small (middle) diameter, and small diameter width? I'm designing a catch tank, but I'm far away from home...

Thanks to Zohsix he set me up with a sweet oversize air tube and fairing stay set up . Fits great looks trick and ready for the first race weekend of this year .

I have removed the charcoal canister, but when I lean the bike to the right side (or shake it) then fuel will leak from the breather tube (I filled the fuel just about 85~90%, not reaching the rim of filler recess), in the attachment you can see some leakage from the breather tube, anyone have...

Does anyone know the diameter of the inner fork tube on the base forks?My forks are at MDM having carts put in, so I can't get a measurement. I am fabbing fender mounts for a quick change front wheel setup and I'd like to start on it before the forks come back. thanks, Brett

While combing through my bike trying to find the source of an intermittent high-idle issue I discovered an oil breather tube that was disconnected. Only issue is that, though it's called a breather tube, it connects to what seems like a cap. Line number 7 in this diagram: Anyone know if...

Anyone else see a problem here??:confused: I was removing the fairings and a few other things to remove the suspension, and I found this little situation. It seems both tubes go to the top of the emissions canister (which I plan on removing shortly) but which tube is supposed to be connected...

Trying to fit a set of CRC race fairings to 1199 base. Not sure how the top air tube is meant to fit in. Read another post they need to be trimmed first because it was designed to fit the S model. Anyone have any pics of this fitted or how they modified it?