turn

Howdy stupid Front Preload Question RE:: Is 6 turns equal to 6MM ? After discovering the plethora of Dave Moss videos - I'm trying to dial in my Front Fork Preload. The 1199 Base Manual says "Spring Preload - Fully Open(counter clockwise)6MM. I've read a few riders say stock was "6 turns...

I installed a switch into my bike to turn the fan on manually. The fan will also go on when it reaches the set factory temperature. Now my fan can go on and off with. O key in the ignition. But all that work to wire the bike up and cut into plastic to install the switch is annoying. I found...

It always felt flimsy and fell off today after canceling the signal. I am disappointed that their design would be so poor. Do you guys a a cheap fix for this or another button from a different motorcycle that will work?

Hello to everyone. Rear turn lights stopped working. Plat number light work correctly. I`ve checked connection,lamps - all good. Any ideas ?:confused:

Hi guys. I bought Ducati performance LED turn indicators for 17' Monster 797. Pluged them in and the left side doesn't work. I tried the same one on the right side, it works. Pluged the stock ones back in and both of them are working fine on both sides. Any idea what might be the problem? Thanks

Hi all, Has anyone measured the resistance, current or load of the OEM front turn signals? I'm performing an integrated turn signal in the headlight mod and sold my stock mirrors before I started this :( I will do a how-to post up when I'm finished so others can do this. I know a few others...

Hi all, I am attempting to install a set of LED strips into my 1199s headlight for turn signals. I purchased a set of HD strips from Diode Dynamics: https://www.diodedynamics.com/hd-led-amber-semi-flex-strip-single.html When running some tests before I open the headlight, I could not...

See previous thread in Racing here. tl;dr: I had a decent speed lowside that resulted in the right clipon, brake master, and throttle breaking off. after crash, bike's engine was off, but the fans/electronics were still running. The clutch cover took some serious scraping, the magnesium...

Hey guys, I want to customize my Supersport S 2018 model by attaching bar end mirrors to my handle bars and removing the stock mirrors with block off turn signals or regular block offs. What I found so far is either the combination of - New Rage Mirror Block Offs + New Rage Cycles LED...

HI everyone just wanted to share some parts I've been developing for the V4 looks like they will be released to sell around the first week of June This is my Machined billet tail tidy Prototype with integrated turn signals. Still in raw aluminum. They will be available in an anodized black...

HI everyone just wanted to share some parts I've been developing for the V4 Any surface, detail or alignment issues you might see will be worked out before release for production. The plate bracket is still in 3D printed plastic. This is my Machined billet tail tidy prototype with integrated...

So I'm digging through piles of parts in my basement looking for something else and realize I still have the full Magneti-Marelli Superbike Electronics kit that came off of my 899/1199R hybrid bike I built a few years ago. I'm not sure how I forgot I had that, it would be the equivalent of...

Hello everyone, I would like to install an aftermarket license plate and I should change the turn light indicator. I have noticed that the connectors I need these are: [IMG] https://uploads.tapatalk-cdn.com/20170822/7463a276d0ae0a38f293c2f4535d5857.jpg [/ IMG] [IMG]...

Does anybody know what brand or type the front turn signal lights plug (the bike side not mirror side) is?

As the title says I'm looking info on I presume a resistor to correct the increased rear turn signal frequency when mirrors / front turn signals are removed. Thanks for any info provided. Sent from my iPhone using Tapatalk

RIZOMA Bar End Turn Signal "SGUARDO": Universal was: $72.00 Now: $59.85 * each - E-Homolagation - Multi-function SMD LED technology - Machined from billet aluminum - High intensity light - Usable with Ø 22 mm (7/8 in) and 25.4 mm (1 in) handlebar - Available in two colors - Sold...

Hi, I am new to this forum, as I just got a salvage 2015 1299 with both OEM mirrors missing. Not a big deal since my bike will be mostly kept for the track with race fairings. Still, I would want a set of turn signals / mirrors for those few times I use it on the street with an OEM nose...

OBERON Bar End Turn Signals w/ CRG Blindsight Mirrors Kit Pricing: $264.99 * FREE Shipping Kit includes 2 CRG blindsight mirrors and a pair of Oberon bar end turn signals Benefits: ◾Improved motorcycle safety ◾Highly visible mounted on end of handlebars ◾Extra wide angle viewing...

Favorable exchange rates have allowed us to reduce the prices on all Rizoma products: Rizoma Turn Signal - "Club S" was: $97.00 NOW: $69.35 * "Club S" has a four wire configuration with more functionality as it offers a two stage red light to provide an additional stoplight function...

CNC Racing LED Turn Signal "Spyde": Universal $56.35 These supremely stylish and beautifully finished aluminum LED indicators stand out for their race-style design that also exudes elegance. Kit is composed of two indicators; it comes with mounting plates for fitting on all bike models...