SOLD! Ducati by Rizoma Brake Lever Protector Part# 96180521A (almost brand new) for Panigale V4

[BMW Alpina]

Ducati by Rizoma Brake Lever Protector Part# 96180521A (almost brand new)
https://www.ducati.com/us/en/accessories/ACC011073

I got this as part of my Ducati Panigale V4 916 25 Anniversario package. However, the dealer pre-installed this before I took delivery and I just notice there is a very slight blemish on the RIGHT handlebar weight (the one with the Brake Lever Protector).
I took delivery of the bike only 10 days ago.

It's look like the person who install this accidentally had his finger nail pressing on the surface while he tighten it to the handle bar. Nobody can really see it unless they look very very closely. I am selling the whole kit including the left handle bar weight that is part of this kit.
Reason for selling, so I can replace this with the new one since I don't want any blemishes for display purposes. I did not have any packaging because they are already installed on my bike.

If you purchase brand new from AMS Ducati, they cost $336.60 or $330 at Ducati Omaha
https://amsducati.com/ducati-v4-brake-lever-protcetion
96180521A - BRAKE LEVER PROTECTION GUARD
I want to sell them for $225 including shipping (48 lower states only) and PayPal fee.
Price is firm and below are the pictures. Please PM me if you are interested.

The first and second picture below shows the blemishes, I marked it so you can see it on the second picture and compare it with the first picture:




And below are the pictures of both the right and left side to show that everything else is good and you will notice that you can't really see the blemishes unless you really look very very closely:







below are left side (clutch side handle bar weight that is part of this kit):

 

[double0]

LOL that is an extremely picky reason to sell them, especially since you're replacing them with the same exact thing. Since this bike is a living room piece and not an actual show bike, it seems to be a silly reason. You can barely even see the blemish but hey, your money. Not a $100 blemish in my opinion. Not even a $10!

 

[BMW Alpina]

LOL that is an extremely picky reason to sell them, especially since you're replacing them with the same exact thing. Since this bike is a living room piece and not an actual show bike, it seems to be a silly reason. You can barely even see the blemish but hey, your money. Not a $100 blemish in my opinion. Not even a $10!

Hello double0, it is a show bike just for me and that is even more important (for me) than an actual show bike but for everybody else

Anyway, as you mention this is a very good value for money for anyone who need the Ducati by Rizoma brake level protector.

 

[Paul G]

turn it around 180, and maybe a tiny bit of black paint dabbed in and wiped off?

 

[BMW Alpina]

Hi Paul, Thanks for the suggestion, but it can't be turn around 180 degree because the "protection bar" came out from the bottom hole of the handlebar weight.
I actually was thinking of using it on the left handle bar as a "clutch lever" protector, however, it will look funny due to the angle... plus the "ducati" wording on the end of the bar will be upside down...
so I can't do anything but selling it. I also just listed this item on eBay.

 

[cruzin2]

I will take it.

 

[BMW Alpina]

I will take it.

I just reply to your PM, sale is pending to Cruzin2. Thanks