RedLine Under Tail Exhaust

Sep 2013
126
70
Orlando
I figured I'd start a thread here just for the RedLine Exhaust since an offshoot discussion started in the AR under tail thread, and redline fits 1299 and 1199.

I ordered this https://www.redline-moto.com/. It is expected to be delivered in November.

I will try to get a before and after dyno runs on the same dyno, with similar weather conditions. I currently have the Full Termi tuned with tuneboy version 6.

I almost went for the Termi undertail but I think it is a bit close to the rear bodywork for my liking, and it's ~3300USD without import tax for stainless headers. Redline is based in the US.

I don't do track riding so db is not a big issue, anything has to be quieter than those Termis thundering off the ground.

So Far with RedLine all my emails have been responded to within a few hours.

I did a little (very little) digging. It looks like one of the founders/owners of Redline is CEO of a manufacturing firm with multi-national facilities that design and manufacture titanium parts for another industry. It seems they have 60 some patents for their products.

It was probably a startup out of need for a good US based company that makes exhaust for exotics and with a few engineers from the other company that raced they decided to try their hand at exhaust systems. Just speculating on this part though.

I'll hopefully be home when it arrives and give ya'll install pics in a reasonable amount of time.
 
Last edited:
  • Like
Reactions: 9 people
Nov 2011
97
30
New York
Finally a heat solution, only 10lbs and it looks beautiful. Might be time to get a 1299 with a Redline under tail exhaust.
 
Mar 2016
615
174
NorCal
Is this a track only pipe? I don't see how you'd mount your license plate with these cans mounted unless you went back to that huge stock license plate holder


Sent from my iPhone using Tapatalk
 
Sep 2013
126
70
Orlando
Is this a track only pipe? I don't see how you'd mount your license plate with these cans mounted unless you went back to that huge stock license plate holder


Sent from my iPhone using Tapatalk
Well, from an emissions standpoint it's a track only exhaust. I'm going to switch back to my stock plate mount until I find or fab an alternative. I would assume that someone will make a tidy tail type plate mount for the 1299 Final edition, which would probably work. Termi offers a new plate mount for their under tail and that might work with this as well.
 
  • Like
Reactions: 1 person
Nov 2011
1,257
653
Norfolk. UK
I figured I'd start a thread here just for the RedLine Exhaust since an offshoot discussion started in the AR under tail thread, and redline fits 1299 and 1199.

I ordered this https://www.redline-moto.com/. It is expected to be delivered in November.

I will try to get a before and after dyno runs on the same dyno, with similar weather conditions. I currently have the Full Termi tuned with tuneboy version 6.

I almost went for the Termi undertail but I think it is a bit close to the rear bodywork for my liking, and it's ~3300USD without import tax for stainless headers. Redline is based in the US.

I don't do track riding so db is not a big issue, anything has to be quieter than those Termis thundering off the ground.

So Far with RedLine all my emails have been responded to within a few hours.

I did a little (very little) digging. It looks like one of the founders/owners of Redline is CEO of a manufacturing firm with multi-national facilities that design and manufacture titanium parts for another industry. It seems they have 60 some patents for their products.

It was probably a startup out of need for a good US based company that makes exhaust for exotics and with a few engineers from the other company that raced they decided to try their hand at exhaust systems. Just speculating on this part though.

I'll hopefully be home when it arrives and give ya'll install pics in a reasonable amount of time.
RPM, I am still sitting on the fence with this one and am waiting on the dyno figures. Not too worried about the db figures as the bike spends almost all its life on the street anyway, but it would be good to have the option so I don't alientate myself from my neighbours. I also need to work out what the cost of shipping would be to the UK plus import taxes/duty as that will bump the price up considerably. Lastly I'll be selling my full Akra system to fund this and would also be keen to see what solution they come up with re: licence plate holders, though I have the shorter CDT carbon one fitted which might be OK, as we can't get away with the undertail plate holders you guys in the US seem to fit prolifically to the Panigale.
 
Sep 2013
1,389
814
East England, UK
Is this a track only pipe? I don't see how you'd mount your license plate with these cans mounted unless you went back to that huge stock license plate holder


Sent from my iPhone using Tapatalk
You think you could get a near straight through pipe on track?! Good luck with that.....
 
Mar 2015
703
411
Indiana
Does it do away with the kickstand like the SL?

Its the best exhaust option I've seen so far thanks for posting it
 
Dec 2016
310
143
Sin City
Just watched their video. Funny how the brake lever guard falls due to the vibration and I'm guessing improper installation