Ok I decided to sell my 2015 BMW S1000R. Asking $12,000.00 OBO. Please send me any low ball offers as I'm desperate to sell it although I would like to. I will take a look at all reasonable offers. Buyer responsible for shipping costs and I can help find a shipping company. If I do sell her, I will use money to put down on either the new BMW S1000R, Street Fighter V4 or new Aprilia Tuono 1100 Factory if no other dealers dump Aprilia. And use the rest to start modding the next bike. Three dealers dumped Aprilia here on Long Island, one in Brooklyn NY and one in Manhattan. The closet one is in White Plains NY around 30 miles away which is fine because other than my local dealer the other around me were 20-40 miles away. And there is on in NJ.
My BMW has 5400-5600 miles on it. Oil changes done every 2500 miles. It has the premium and sport package. Kelly Blue book has it listed at $10,105 if sold by dealer and around $9275 if sold by owner. The title is clean and the bike is paid off. I have close to $12,000 worth of upgrades on the bike which include the Bursig lift stand that I will include. My cost was about $8000 on the parts. I would like $11500 for the bike. It used to be red with a full Arrow shorty EVO exhaust, had gilles tooling rear sets, Power Commander 5 with Auto Tune carbon fiber parts. As well as many other mods. Last spring I had the tank, radiator covers, small side fairings and small pieces on the left and right of the fascia painted BMW black sapphire metallic, had the wheels powder coated cherry red, replaced the arrow exhaust with a full akrapovic exhaust and akrapovic gp can (bike is a 2015 but i fit the 2017-19 akra gp can and exhaust onto it), replaced the gilles rear sets with Lightech R series, installed Rapid bike evo and rapid bike my tuning , got Ilmberger to make me custom matte carbon side tank covers, and a matte carbon belly pan. While the rest of carbon fiber listed below is gloss carbon And installed a Socal werks cam chain tensioner. The pic with the full light beam cure shows the LED light conversion for and the LED parking light added. So now instead of just one bulb working in low beam and one bulb working in high beam. Both bulbs are on at low and high beam and draw only 20amps. The side pieces on either side of the front fascia were still red before I had someo of the red painted bmw black sapphire metalic. The gas tank is a bit dusty and the rear passenger seat is a bit dusty. Anyone interested I will clean her up. I also have pic if anyone wants to see the bike when it was still oem red with the shorty Arrow competition exhaust , corbin seat, and a few pieces of carbon. I installed the black samco hoses and samco hose clamps April 2020 and did a full radiator flush with distilled water. Then fill up the cooling system with Engine Ice.
Here is a list of the mods done to the bike as it is now. The bursig lift stand would be included in the sale. The title is free and clear.
1) Full Six gloss carbon tail strada rear tail section
2) Full Six rear tail fairings
3) Ilmberger gloss carbon rear Hugger
4) Ilmberger gloss carbon front fender
5) Ilmberger matte carbon tank cover
6) Ilmberger matte carbon side tank covers
7) Ilmberger matte carbon belly pan
8) Ilmberger gloss carbon chain guard
9) Conquest Carbon gloss carbon fascia
10) ASV C5 Shorty adjustable brake and clutch levers
11) Gilles tooling brake and clutch lever guards
12) Rizoma brake reservoirs
13) Rizoma mirrors
14) Rizoma handlebar
15) Rizoma swing arm spools
16) Rizoma front and rear turn signals
17) 2017-18 Akrapovic full system with 2017-18 gp can
18) Lightech R series rear sets with reverse shifting and can be changed to regular shifting
19) MVR touring windscreen
20) Trex front magnetic axle protector
21) Trex rear magnetic axle protector
22) T-Rex racing frame sliders http://t-rex-racing.com/catalog.php?item=595
23) T-Rex Engine saver kit http://t-rex-racing.com/catalog.php?item=724
24) Luimoto front and rear seat covers
25) Luimoto gel insert for driver
26) Yoshimura tail tidy
27) Ohlins steering damper
28) Evotech 2017-18 right side exhaust hang bracket to mount 2017-18 full akra full exhaust system and Evotech left side passenger bracket delete plate
30) Tech Spec Snake Skin tank protectors
31) Rapid Bike Evo
32) Rapid Bike my tune
33) Cox Racing radiator and oil cooler guard
34) LED bulb in right and left light housing
35) LED parking bulb in right light housing
36) LED low beam cure done as featured in the S1000R forums. Now both right and left LED lights are fully lit up in low beam instead of just the right side being fully lit and the left high beam side being partially lit.
37) Wunderlich tank bag
38) Wheels powder coated cherry red
39) side covers on fascia, lower radiator covers and side covers painted bmw black sapphire metallic
40) 520 EK 3D gold and black chain conversion
41) 520 Driven 46 tooth rear candy red sprocket conversion
42) 520 Driven front sprocket conversion
43) Woodcraft rear servo buddy (Rear servo was removed when exhaust was installed so Woodcraft servo buddy installed to prevent error codes)
44) carbon red and carbon black bmw roundels
45) Sprint air filter
46) Shorai battery
47) Driven Racing Engine airbox delete kit (Used when installing Rapid Bike my tuning system)
48) Bursig stand
49) Souther California Motowerks Cam chain tensioner
50) Samco black silicone hoses and Samco hose clamps
51) Red aluminum bolts
52) Red gilles tooling chain adjusters
53) Lightec gas cap
54) Metzeler M7RR tires with 1300 miles
My BMW has 5400-5600 miles on it. Oil changes done every 2500 miles. It has the premium and sport package. Kelly Blue book has it listed at $10,105 if sold by dealer and around $9275 if sold by owner. The title is clean and the bike is paid off. I have close to $12,000 worth of upgrades on the bike which include the Bursig lift stand that I will include. My cost was about $8000 on the parts. I would like $11500 for the bike. It used to be red with a full Arrow shorty EVO exhaust, had gilles tooling rear sets, Power Commander 5 with Auto Tune carbon fiber parts. As well as many other mods. Last spring I had the tank, radiator covers, small side fairings and small pieces on the left and right of the fascia painted BMW black sapphire metallic, had the wheels powder coated cherry red, replaced the arrow exhaust with a full akrapovic exhaust and akrapovic gp can (bike is a 2015 but i fit the 2017-19 akra gp can and exhaust onto it), replaced the gilles rear sets with Lightech R series, installed Rapid bike evo and rapid bike my tuning , got Ilmberger to make me custom matte carbon side tank covers, and a matte carbon belly pan. While the rest of carbon fiber listed below is gloss carbon And installed a Socal werks cam chain tensioner. The pic with the full light beam cure shows the LED light conversion for and the LED parking light added. So now instead of just one bulb working in low beam and one bulb working in high beam. Both bulbs are on at low and high beam and draw only 20amps. The side pieces on either side of the front fascia were still red before I had someo of the red painted bmw black sapphire metalic. The gas tank is a bit dusty and the rear passenger seat is a bit dusty. Anyone interested I will clean her up. I also have pic if anyone wants to see the bike when it was still oem red with the shorty Arrow competition exhaust , corbin seat, and a few pieces of carbon. I installed the black samco hoses and samco hose clamps April 2020 and did a full radiator flush with distilled water. Then fill up the cooling system with Engine Ice.
Here is a list of the mods done to the bike as it is now. The bursig lift stand would be included in the sale. The title is free and clear.
1) Full Six gloss carbon tail strada rear tail section
2) Full Six rear tail fairings
3) Ilmberger gloss carbon rear Hugger
4) Ilmberger gloss carbon front fender
5) Ilmberger matte carbon tank cover
6) Ilmberger matte carbon side tank covers
7) Ilmberger matte carbon belly pan
8) Ilmberger gloss carbon chain guard
9) Conquest Carbon gloss carbon fascia
10) ASV C5 Shorty adjustable brake and clutch levers
11) Gilles tooling brake and clutch lever guards
12) Rizoma brake reservoirs
13) Rizoma mirrors
14) Rizoma handlebar
15) Rizoma swing arm spools
16) Rizoma front and rear turn signals
17) 2017-18 Akrapovic full system with 2017-18 gp can
18) Lightech R series rear sets with reverse shifting and can be changed to regular shifting
19) MVR touring windscreen
20) Trex front magnetic axle protector
21) Trex rear magnetic axle protector
22) T-Rex racing frame sliders http://t-rex-racing.com/catalog.php?item=595
23) T-Rex Engine saver kit http://t-rex-racing.com/catalog.php?item=724
24) Luimoto front and rear seat covers
25) Luimoto gel insert for driver
26) Yoshimura tail tidy
27) Ohlins steering damper
28) Evotech 2017-18 right side exhaust hang bracket to mount 2017-18 full akra full exhaust system and Evotech left side passenger bracket delete plate
30) Tech Spec Snake Skin tank protectors
31) Rapid Bike Evo
32) Rapid Bike my tune
33) Cox Racing radiator and oil cooler guard
34) LED bulb in right and left light housing
35) LED parking bulb in right light housing
36) LED low beam cure done as featured in the S1000R forums. Now both right and left LED lights are fully lit up in low beam instead of just the right side being fully lit and the left high beam side being partially lit.
37) Wunderlich tank bag
38) Wheels powder coated cherry red
39) side covers on fascia, lower radiator covers and side covers painted bmw black sapphire metallic
40) 520 EK 3D gold and black chain conversion
41) 520 Driven 46 tooth rear candy red sprocket conversion
42) 520 Driven front sprocket conversion
43) Woodcraft rear servo buddy (Rear servo was removed when exhaust was installed so Woodcraft servo buddy installed to prevent error codes)
44) carbon red and carbon black bmw roundels
45) Sprint air filter
46) Shorai battery
47) Driven Racing Engine airbox delete kit (Used when installing Rapid Bike my tuning system)
48) Bursig stand
49) Souther California Motowerks Cam chain tensioner
50) Samco black silicone hoses and Samco hose clamps
51) Red aluminum bolts
52) Red gilles tooling chain adjusters
53) Lightec gas cap
54) Metzeler M7RR tires with 1300 miles
Attachments
Last edited:
And guys love the low pricing I sell them parts for. For example a certain set of forged aluminum Italian wheels which I cant say because of map pricing I sold for $2150 shipped. A certain set of Italian brake rotors which I cant say because of map pricing I sold for $718 plus shipping saving the customer $126.00. Ilmberger parts I discount for a pretty large discount. Helmets, CnC racing etc etc at great prices. I just cant say how much unless a customer approaches me and asks for prices for a particular brand.
