First up is a Jetprime throttle housing with switches, the new V4 style. I had a problem with one of the buttons originally but sent it to Jetprime who re-built it and sent it back. I verified it worked and it's been unused otherwise. I'm including the CNC throttle tube which removes the freeplay. $175 shipped.SOLD PENDING FUNDS
Next up is a set of CNC Racing clip-ons for 53mm fork tubes and comes with the steering damper mount. Mocked up on the bike but not ridden. The tubes can be removed from the mount without taking the mount off of the fork, you just need a 1/4" drive allen head socked and a long extension to get at the bolt. The bars are slightly wider than OEM and allow for adjustment. The delrin ends screw into the bars. $200 shipped.
Third is a CNC Racing top clamp. Mocked up but not ridden. $200 shipped.SOLD PENDING FUNDS
Finally, a CNC Racing steering stem nut. Mocked up but not ridden. I torqued it to 35Nm per the manual after greasing it. I took the photo from an angle to show the minimal marks from the steering stem tool. You can't really notice it in person though. I layered two pieces of blue painters tape on top of the nut then pocked the prongs of the tool through the tape so when tightening it the anodizing wouldn't get damaged. $30 shipped.SOLD PENDING FUNDS
Open to reasonable offers and combining items for a package deal.
Payments via PayPal or Venmo. PM or reply with any questions.
Received. I'll send it out today. I'm including the rear bracket. You can mount it directly to the OEM or RCS brake master or when using the bracket, directly to the bar.
