1199/1299 parts on Ducati V4?

Ducati Forum

Help Support Ducati Forum:

Joined
Feb 28, 2016
Messages
113
Location
Norway
I know it's a bit premature but does anyone of you know if you can use 1x99 forks (Ohlins FGRT203), rear shock (Ohlins TTX36) or Panigale 1x99 wheels on a standard V4? Have a set of DP rearset I also would like to use on V4 if stock rearsets are no good.

Thank's.
 
I know it's a bit premature but does anyone of you know if you can use 1x99 forks (Ohlins FGRT203), rear shock (Ohlins TTX36) or Panigale 1x99 wheels on a standard V4? Have a set of DP rearset I also would like to use on V4 if stock rearsets are no good.

Thank's.

i ´m not sure, but i think front forks and wheels yes, rear shock provably no.
 
There's no chance that the shock or rearsets are going to transfer over. Forks and wheels "SHOULD" be the same, that's a pretty standard setup on Ducati Superbikes.
 
hi guys, bring up this post as i have the same question. i did lots of mods on my base 1299 and was wondering which parts can be swap over to the v4. Can these parts be swapped over?

ohlins front fork fgrt 203 and steering damper sd 040
forged marchesini rims from 1299s
ducati peRformance gas cap
rapid bike evo
brembo supersport disk
brembo rcs 17 and 19

there are more mods but its quite obvious it won't fit the v4. any inputs is much appreciated. thanks in advance everyone.:)
 
yes ohlins front fork fgrt 203
yes steering damper sd 040
yes forged marchesini rims from 1299s
no ducati performance gas cap
yes rapid bike evo
yes brembo supersport disk
yes brembo rcs 17 and 19
 
Last edited:
Looking at what I can transfer also

Do the levers transfer?
Seems like the battery is the same?
Will the pegs transfer (not full rearsets, just pegs)
Bar ends will transfer I would assume?
 
Last edited:

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Back
Top