1299 engine in 1199 chassis

Ducati Forum

Help Support Ducati Forum:

Which 1299 engine did he put in? If he installed a 1299R engine, he got an 1199R engine with the titanium rods and lightened crankshaft, because the 1299R was the homologation bike for WSBK and MotoGP, and was limited to 1200 cc's. So, if he swapped in an 1199R engine into an 1199, well it's not really an 'upgrade' is it? 650ib does some sketchy things and doesn't really explain what is going on very well. I stopped watching his channel because of his 'goody 2-shoes' act and calling everyone his good buddy while spending more on a bike than I have in all 3 of mine put together, then blowing it up, then replacing it, then changing again, all with an unlimited bank account. He doesn't do his bikes, his mechanics do his bikes. Not much to brag about when you blow things up doing smack downs based on someone else's expertise as a builder.
Right I definitely feel you on that. He replaced it with a 1299s as I have talked to the techs at Ducati Detroit to get insight for the build I have going on now, just need to figure out where the other cord to this scu plugs to
 
Post a picture of the harness you’re talking about. My bike is apart right now so, I could look and tell you.
 

Attachments

  • IMG_0883.jpeg
    IMG_0883.jpeg
    2.1 MB
  • IMG_0881.jpeg
    IMG_0881.jpeg
    1.5 MB
Sorry my bike is in the shop so I won’t be able to get an actual pic of the suspension control unit and the wire I’m talking about but this is the best I can do as far as showing you what I’m talking about. Ok the harness it’s plugged in already but it’s a long cord that’s attached to it as well that has a connector to plug into something
 
Are you asking about a 4-pin connector that is directly wired to the smart EC (Ohlins ECU)? If so, its the steering damper.

68 is the Ohlins SCU

67 is the steering damper

1735354078714.png


The full wiring diagram can be found at the end of the owner's manual, which you can download from here:

 
Are you asking about a 4-pin connector that is directly wired to the smart EC (Ohlins ECU)? If so, its the steering damper.

68 is the Ohlins SCU

67 is the steering damper

View attachment 58935

The full wiring diagram can be found at the end of the owner's manual, which you can download from here:


Are you asking about a 4-pin connector that is directly wired to the smart EC (Ohlins ECU)? If so, its the steering damper.

68 is the Ohlins SCU

67 is the steering damper

View attachment 58935

The full wiring diagram can be found at the end of the owner's manual, which you can download from here:

If the end of the connector is small and white then yes.
 

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Back
Top