I want to revert the bike to the stock map, reason being I want to be able to use Melcodiag, and have been reading about people losing their maps after using the software.
I have a '12 S that has a full Termi, somehow with only the slip on up map (dash shows Racing, not Racing Evo). It also came with the up map key part number 96524211B, which is the Racing map for the slip ons, which I assume is what was used on the bike.
So I plug in the up map key, and turn on the ignition without starting the bike. Nothing happens; the dash just shows RACING, then straight to the regular display with RPM, temp, etc. It's as if nothing was plugged into the connector. Do I have a bad/dead up map key?
I have a '12 S that has a full Termi, somehow with only the slip on up map (dash shows Racing, not Racing Evo). It also came with the up map key part number 96524211B, which is the Racing map for the slip ons, which I assume is what was used on the bike.
So I plug in the up map key, and turn on the ignition without starting the bike. Nothing happens; the dash just shows RACING, then straight to the regular display with RPM, temp, etc. It's as if nothing was plugged into the connector. Do I have a bad/dead up map key?
