Installing the 24 degree kit w/pics

Spud312r · Oct 13, 2018

Doug916SP said:
Your pics are not the 23.5 inserts, at least they don't look like mine. The holes are too close to being centered. I suspect they are the 1299 plates. With the 23.5, the shaft is moved Forward 5mm, both at the top and bottom to extend the wheelbase. If the hole at the top was 5mm forward and the lower was 5mm rearward, the rake would be like 14 degrees w/tire hitting the lower fairing!

Anyway my 23.5 part numbers are stamped on each piece. I don't plan to install them anyway as I'm satisfied with my 24 degree setup.

My 24 degree kit came from Jarel and was for the 899, I believe. That's where I got the part numbers.

Good luck with the project and let us know the progress.

I'l keep you posted ..

But take a look here , it explains it and the stamped part numbers are exactly the same as mine ;-)

http://ducatiforum.com/mechanical-technical/22236-1199r-kit-rake-angle-inserts.html

Installing the 24 degree kit w/pics

Help Support Ducati Forum:

Spud312r

Similar threads

Register CTA

Recent Discussions