So I replaced the seals For the slave cylinder of the clutch on a 2000 Ducati 900 SS . Put it back together I filled the master cylinder reservoir with fluid and I cannot get it to pump through. No matter what I tried . Tested master cylinder , it’s fine. The seals on the slave piston are fine , I’m pulling clutch handle , opening bleed valve , close it . IT will not suck fluid from the reservoir. I blew air through the line and it’s not clogged, Everything worked fine so I took the slave cylinder apart redid the seals because I have a small oil leak coming from that area and I thought maybe it was from the pushrod everything worked fine so I took the slave cylinder apart redid the seals because I have a small oil leak coming from that area and I thought maybe it was from the pushrod. should I fill the slave cylinder with fluid before I connect the banjo bolt and bleed valve? Thanks
Problems with clutch slave cylinder after overhaul
- Thread starter Heresy23
- Start date
Help Support Ducati Forum:
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
