Help Support Ducati Forum:
- Joined
- Feb 11, 2012
- Messages
- 8,417
- Location
- here
rear footpegs?
stock or aftermarket exhaust?
do this:
take the peg arms apart (2 hex bolts in the middle) install the one side first (can't remember left or right, take the one with the treads for the 2 bolts you just took out).
fix the larger bolts in the sub frame - there are holes in the heat shield to get right there.
put the other side on and rejoin the sides with the smaller bolts and insert the larger bolts and tighten to sub frame.
not so easy to explain in just words but i hope you got it.
Phil
stock or aftermarket exhaust?
do this:
take the peg arms apart (2 hex bolts in the middle) install the one side first (can't remember left or right, take the one with the treads for the 2 bolts you just took out).
fix the larger bolts in the sub frame - there are holes in the heat shield to get right there.
put the other side on and rejoin the sides with the smaller bolts and insert the larger bolts and tighten to sub frame.
not so easy to explain in just words but i hope you got it.
Phil
I've just put rear pegs on my 1299s. When you undo the bolts which hold the exhaust on. you can pull down the exhaust just enough to pull the alloy spacers off their seating. Then wriggle the rear pegs in one at a time. But I could only get one bolt in where the peg brackets join. The other one will not go in past the heat shield. If you join the brackets together first they are impossible to fit.
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
