Racing belly pan for 2019 V4 w/ Akro?

Hi to all. I'm interested in finding a minimal solution to pass racing tech inspection, related to the V4 belly pan.
I have a 2019 V4 base model with Akro exhaust.
Ideally, I'd like to find a one-piece belly pan that would hold fluids per the rules and mate easily to the rest of my stock fairings. (Kickstand would be removed also.)
Any recommendations?
Thanks!

To follow-up, I have found a good solution:

I bought this "Race Lower for AKRO $339.95" from here: Panigale V4R/S 2018-21 Lavatex Race Bodywork (Prepreg Basalt Fiber) - HotbodiesRacing.com
It all lines up, including holes, to the stock upper fairings of my 2019 base model.
It comes fitted with some DZUS clips (no fasteners) but using these with the stock uppers would require drilling the upper holes bigger, so I opted to order 6 new Ducati quick connect clips (85041951AA) and use the stock screws. (Alternatively, one could recycle the clips from the stock lower fairings.)

The Lavatech race lower requires some cutting (Dremmel tool and a file works well) as they marked a cutout for the exhaust.
Also, if you want to use the Ducati quick connect clips, you must cut off a few mm from each tab, as they are a bit too tall for the Ducati clips. But this is all not too hard and it came out very clean.

This is a solid one-piece lower fairing that would contain a lot of fluids, as per race regulations. I plan to run it for track days as well (kickstand removed).
It's probably meant to be painted but I'm leaving mine black, as it came.

Do you have a picture of what it looks like from the rear attached to bike, from underneath. Also, a picture of what it looks like on the inside? I am running into the same problem with race officials. If not no worries. Thanks Fry.

More pics. Hope this helps.

Great pictures thank you Fry. Cleared up any questions I had.