RapidBike Racing Installed

I have installed the RB racing module, bike runs great, no errors showing up, I put 15-20 miles on the bike last night..

But, here is the problem(?) I plugged the USB into my laptop to upload map 3 as I bought the unit used, and the RB software doesn't recognize the RB unit, it comes up with an error (not connected).

I tried it with the bike off, keyed on, and bike running.
Also I am not quite certain of the correct map, maybe you guys could throw some advice my way, I am assuming I want to use the map with the full Termi system, upmap loaded, and ducati reflashed, as my bike is a 2014 1199. But here is where I am a little hesitant, I am only running slip-ons. So are you guys running the full system map?

Thank you guys in advance..

Mike

YTURAN is the point person for the RB stuff. He wrote me that he is off until tuesday.

I have a similar request since I picked my RB Race from JeffD and I need to get a laptop this weekend so I can play around with the features as well.

I haven't used a windows laptop for over 10 years and don't feel like doing the VM stuff since my Ross Tech for the Audi and the RB will be the only reason to have a PC in the garage.

I'm running the new Termi Front exit and the set-up that the former owner had plugged in. I assume that the system adjusts to the fueling and load of the engine automatically as the bike rides? I ran around for about 60 miles yesterday and it seemed to change a bit over the ride. I might be imagining things though.

I read on the RB Thread that YTURAN stated something like 300 KM/Miles is required for the auto adjust to work?

Also, I think you have to register the device in order to get the software but I will wait till Tuesday to find out as well and will pass on what I learn.

I am very happy with the support shown and the product as well. I am glad I didn't go with a competing product. This piggy-back tune seems to work quite flawlessly.

I was absolutely amazed at how powerful the bike is in race mode above 5k! Friggen pulls like a beast!

crazyduc996 said:

I have installed the RB racing module, bike runs great, no errors showing up, I put 15-20 miles on the bike last night..

But, here is the problem(?) I plugged the USB into my laptop to upload map 3 as I bought the unit used, and the RB software doesn't recognize the RB unit, it comes up with an error (not connected).

I tried it with the bike off, keyed on, and bike running.
Also I am not quite certain of the correct map, maybe you guys could throw some advice my way, I am assuming I want to use the map with the full Termi system, upmap loaded, and ducati reflashed, as my bike is a 2014 1199. But here is where I am a little hesitant, I am only running slip-ons. So are you guys running the full system map?

Thank you guys in advance..

Mike

Click to expand...

Yaman will sort this out for you, don't worry.

I have no worries that Yaman will sort this out, I have emailed him a couple of time previously about a couple of things and he has answered in a professional and thorough manner, I am just about to head out on a 350-400 mile round trip and was a little concerned, I know the unit will map itself in that time but the ignition is what really has me wondering..

I picked up a used PC yesterday and downloaded the software from Dinsport.

Played around with the adaptive settings and lowered the Air/Fuel ratio on the slider bar at the top of the left hand side of that page.

I also uploaded a different map from the Evo file. The Full Termi file I was running was a bit rich.

I like the ability to mess around with the system. Now we just need better weather here in Colorado.

It is truly a great system. Wish I had it years ago on some of my other bikes. Bazazz and PCV's are good, but I like Rapidbike the best so far.