Recall - front brake fluid reservoir bracket

Ducati Forum

Help Support Ducati Forum:

jackyff8

jackyff8

Joined
Nov 14, 2022
Messages
16
Location
CANADA EH?
anyone else got this and know what the issue may be? Could find any details on the campaign no. 274
 

Attachments

  • IMG_7246.png
    IMG_7246.png
    1.1 MB
I broke 2 of these reservoir brackets. Used a brembo RCS item for quite a while but had the recall done last week. It's a revised, stronger reservoir bracket. I didn't get any info on the part number with this.
 
Mcv4 said:
I broke 2 of these reservoir brackets. Used a brembo RCS item for quite a while but had the recall done last week. It's a revised, stronger reservoir bracket. I didn't get any info on the part number with this.
Click to expand...
so you have RCS master cylinders and kept the original reservoir and reservoir brackets and both brake and clutch brackets broke?
 
I have stock 22 V4 master cylinder and broke 2x front brake reservoir brackets. Used a Brembo alloy bracket as was sick of breaking the stock part. Hopefully the revised Ducati one from the recall will last now.
 
jackyff8 said:
so you have RCS master cylinders and kept the original reservoir and reservoir brackets and both brake and clutch brackets broke?
Click to expand...
The OEM bracket won't work with the RCS masters. The bracket for the RCS uses the top mounting bolt for the clamp to hold it onto the bar as it's means of attachment.

I checked Ducati's recall page, my bike is listed. I think I'd rather just buy a RCS one instead of letting a dealer touch it.

1734476755711.png
 
The OE reservoir doesn't work 100% perfectly with the RCS bracket but good enough. It looks like a bit of an add on fix compared to the OE bracket too (probably better if you had it coated / anodized black) if you're worried about that sort of thing.
 

Attachments

  • IMG_4503.jpeg
    IMG_4503.jpeg
    2.2 MB
What do you mean by not working 100%, can you elaborate? IIRC, the oem res and a locating pin and there’s a hole for it on the OEM bracket. I’d probably just snap off the pin and be done with it.
 
Last edited:
Here is mine on SP2. I noticed the bracket is 1. Black 2. It’s mounted on the back bolts of the master cylinder instead of using the
IMG_7267.jpeg
front bolts
 
BP PanigaleV4S said:
What do you mean by not working 100%, can you elaborate? IIRC, the oem res and a locating pin and there’s a hole for it on the OEM bracket. I’d probably just snap off the pin and be done with it.
Click to expand...
Only what you are saying regarding the locating pin really. The brembo bracket sits the res very close to the fairing and only relies on the friction between bolt and rubber grommet to stop it from turning. Mine did vibrate on the fairing a couple of times. No biggie though. It's hard to bend the bracket to give it more clearance without making the res sit at an angle.
 
BP PanigaleV4S said:
The brake reservoir bracket can break.

ETA: I've been trying to find the text or a PDF that would show the new part number, but haven't had any luck.
Click to expand...
I thought you found it before. Maybe was someone else. Old bracket pn ended 222A and new bracket 224A or something similar. I recall one of the 2's was replaced with a 4.
 

Similar threads

A
Leaking bleed screw when bleeding brakes
Replies
3
Views
125
Alsky
A
rja4z3
Options to Move Front Brake Reservoir?
Replies
15
Views
676
JHTmcrider
JHTmcrider
A
Leaking Bleed Screws
Replies
0
Views
39
Alsky
A
C
Brembo RCS Corta Corsa + Hyp 950 SP
Replies
2
Views
200
Curly
C
MrBIgBiker
For Sale 16R part out (2nd thread, whats left)
Replies
5
Views
232
steve2z
S

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top