Tuneboy Dyno Tuning

Ducati Forum

Help Support Ducati Forum:

Joined
Aug 27, 2014
Messages
721
Location
Midwest
Taking the bike to the dyno this afternoon. The shop has no experience using Tuneboy/Innovate stuff. I researched some of the YouTube videos, and everything seems pretty straight forward.

When using a dyno to create a custom tune using Tuneboy Trim and the WB01 box, is there an adapter that allows you to plug in two wideband O2 sensors into the WB01 at one time? Or is it a one cylinder at a time kind of thing?

What is the exact hardware required to do dyno tune w Tuneboy?
 
I just did a base run using the bike as it currently is setup.

2014 Ducati 1199
Full Akrapovic Exhaust w dB killers removed
Sprint P08 Air Filter
Tuneboy,
ECU w "Panigale1199_V207_CruiseAndTuning_V4_1_Tune_Akrapovic.dat" file and the "Akrapovic_2.trm" trim file.
Temp was warm, 85F.

Peak HP was 169.6 @ 10400 RPM. Eh.

I was more impressed with the torque curve though. The guy running it said the bike was running rich. I kind of had an issue with the way he set things up. Two fans on the floor slightly directed upwards. Nothing at the air inlets. The speed graph, these were 4th gear pulls, indicated something like 135-140 mph. Needless to say, the engine would not be limited at that speed to what its drawing through the pistons downward stroke. The whole point of the air ducts is that some of that 100+ MPH air is forced into the engine...but I digress. The air/fuel graph did show a weird bump at the low end. This wasn't pulled from the O2 sensors, but from a probe inserted into the right can. Again, I wonder about the validity of data gathered from half of the system.

I've also read that running with the dB killers in actually gave a slight increase, but I've also read the opposite here. I wish I would have had more than one trim file loaded to test out the different ones.
 

Attachments

  • IMG_0976.jpg
    IMG_0976.jpg
    84.5 KB
  • IMG_0977.jpg
    IMG_0977.jpg
    85.8 KB
Last edited:
Granted, that's a 1299, but needless to say I'm left with more questions than answers after paying for a dyno run.

With the 39T sprocket and the Tuneboy trim file "Panigale_1199_Akrapovic.trm", the bike will power wheelie on command in 2nd.

I don't know. 169 something was disappointing.
 
Last edited:

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Back
Top