adjustment

Hi all I have a big problem with seat height and its gona get a heap worse when my comfort seat arrives so my question is this why done owners with same problem simply adjust the rear suspension linkage to lower height I know geo will change from factory setting but any one thing of any other...

Hi, I was hoping that one of you would be able to answer my question (My dealer has no idea). How much adjustment can you get out of the brake lever on the DP rearsets? The reason I need to know this, is because I am 6 foot 1 and I need my foot controls set quite low. With the standard...

I am about to adjust the chain tension, but of course the manual states the need for making sure the chain adjustment screws on the swing arm ( figure 180 on page 224) are tight, but provides no indication of the torque setting. Any key know?

Ok, So I just got done reading another thread on the 15,000 mile service which brings on the dreaded valve adjustment and cost for it. My questions is this, has anyone attempted to perform a valve adjustment in their garage? My buddy and I have done ours in the past on his 998 and my 999...

How do I adjust the chain slack?

I just got my bike back from the 600 mile service and the clutch is all out of whack. It was great before I took it in so I don't know what happened while the service was being done. I like to use my index and middle finger to pull in the clutch. Now, I have to use all 4 fingers and pull the...

Just curious if anyone have their bikes delivered without the C wrench for rear shock adjustments, i'm running on a base with abs and i realise my toolkit got no C wrench, which i think came on almost all my bikes.

Hi, Is it me or is it pretty impossible to go by the manual re. chain adjustment? It says 50 - 52mm but you can't deflect it upwards that much in the middle you hit the swingarm. Not really a big problem as I just adjust it until it feels/looks right, a bit on the loose side but not...

one of the things i noticed on my first ride was that the ride by wire throttle has quite a bit of "slack" off idle. i prefer almost no slack and usually adjust my cables to eliminate it. is there a pre-travel adjustment? pete

Anyone able to adjust the gear change leaver ? I have tried but it's solid and won't turn, loosened off both lock nuts, small one and big one, one has a left hand thread, yes I know all that, but the rod will not turn. Do not wan to put to much force on it just in case I shear the cap head bolts...