chain

Hi all please can someone confirm the OEM chain pitch and link length for a SFV4S 2020? thanks

I have changed the transmission kit of the Ducati panigale v2 2020 from 15/43 to 14/44 and when I am driving the motorcycle suddenly the gear I am in disappears and the neutral N appears activated on the neutral led and it flashes traction control. After a random time passes, the gear I'm...

I'm interested to hear what V4 riders recommend to use as a good Chain Cleaner and Lube, im in the UK so ideally it has to be available here

Hello, I was just curious if you can adjust the chain on the panigale with it on it's side stand. I checked the manual and it just shows the bike on a rear stand getting it's slack measured. Trying to avoid buying a rear stand for now because they are expensive. I would attempt it instead of...

Has anyone had any issues with the stock DID chains stretching? My bike is used 90% on the street, though I am an experienced track rider. I have ridden 1000cc supersports for 20 years now. I use this bike as my daily ride to work in the warmer months - I'm not usually riding aggressively in...

need some views,replaced oem chain & front sprocket with regina heavy duty chain & front sprocket from super sprox.my bikes is 2016 pikes peak.had to reduce the size of front sprocket with machine by almost 2mm aschain was getting stuck,hope no issues will spring uplater,views from our learned...

V4S jerky motion at/above 8000 rpm, ""SOLVED"" My v4 s is acting strange around 8000 rpm. It runs very jerky and performs a very constant pulsating movement with steady throttle/ constant rpm but in the higher range from like 8000-11 000rpm. When accelerating hard it feels like the bike bumps...

Im in the middle of doing a quick-change setup in the rear (39T) and dropping a tooth in the front (14T) alongside a new chain. 2 questions: How many links do I need for a 14-39 setup? Ive read a couple times now that factory length is needed but I see a number of people calling...

Is there such a thing?? Suppliers in the Uk? Help appreciated

new recall, chain tensioner this time should be straight forward, your dealer need to tighten it up to spec so, I guess your bike does not come full spec when leaving factory

used once. have a DID master link i can throw in as well. 75 shipped DID 520 VX2 Pro-Street Series ZJ X-Ring Rivet Master Connecting Link (Gold)

I just picked up my V4 (base) a few days ago and noticed upon arriving home and riding through my underground parking that the bike was making a pretty noticeable clunking / clattering noise when rolling on and backing off the throttle. The more suddenly, the worse. I inspected the chain and it...

Having some trouble determining my chain tension since I adjusted all my suspension settings last season. I didn't realize they would even have an impact, however, if i measure per the picture, 49/51 mm takes you right into the exhaust pipes. I can measure the true movement of the chain by...

Noticed today that the chain is slapping the swing arm on decel. Is this normal for Ducati bikes? The bike has 8 miles on it.

Hey guys, I did some searching but couldn't come up with anything solid. I was looking for a set of WSBK style chain adjusters for the 899/959 Panigale like the ones attached. If there are no solutions out there, I would like to gauge interest in producing some sets of these. Let me...

Hey guys I have a stock 39 tooth rear sprocket and chain off my 1299 Panigale. Parts have 323 miles on them I regeared to a 41 sprocket. Just wondering if anyone is interested in this stock low mileage stuff for cheap. Pm me or text me 813-735-9097 Jack

Hey all, I have to tighten my chain up on my Diavel about every second time I go on a ride for a few hours. Can anyone tell me any tricks there may be to stop it from coming loose. I don't have a talk wrench but I do it up pretty damn tight after adjusting so is there anything else I should be...

Corse Dynamics created this non slip design after we encountered a frozen eccentric hub. Conventional eccentric tools would just slip off, marring the eccentric and busting knuckles. The unique design with four contact points grip like no other and easily turn the eccentric. CORSE...

I removed the chain guard and "fin" think it looks pretty good with the chain set up I have.

Corse Dynamics created this non slip design after we encountered a frozen eccentric hub. Conventional eccentric tools would just slip off, marring the eccentric and busting knuckles. The unique design with four contact points grip like no other and easily turn the eccentric. CORSE...