height

Hi all, I'm just under 5'4" and can ride my 796 fine but hav some concerns about a 1299s purchase. Test ride one Saturday loved every moment. I'm told the 1299s can mechanically (manually reduced by 15mm) if the front and rear are dropped equally am I correct to assume the handling should be no...

Afternoon Fellas; is there a way to measure my rear ride height in which I'm talking the same numbers as people using the ride hight tools? I would like to convey my current numbers to my mechanic. I added 4mm to my rear shock shaft from stock but I didnt measure my ride height b4 that so Im not...

Morning, for those you with base models or those of you running the stock Marzocchi forks and base rear shock (in flat) what are your ride heights Front/Rear. I'm chasing a setup and would like to know what other people have dialed in in that dept. Thanks.

I recently upgraded my stock suspension to the full Ohlins fork (FGRT203), but I mistakenly took the old forks off before measuring how high they sat above the upper triple tree. Sadly, this is the measurement that the documentation from Ohlins references for where to install their forks...

Looking for guidance from experienced racers, track riders on ride height with swingarm in -2 and/ or -4 configuration. Given the inherent variability in this measurement, am mostly interested in changes to suspension link length (center to center) and shock length (center to center). For...

Okay so here I am in the third world and I need to measure ride height on my bike, no I don't have the special tool, hence this post. How else would you measure it? Thanks.

The 1199 is sensitive to ride height adjustment. So ive made a simple tie rod featuring quality spherical rod end bearings. Im not planning on mass production but will happily make a sell a few for any one interested in seriously setting up their bikes Cost? about £100GBP I'll...

BellissiMoto - Ducabike Ride Height Adjusters Has anyone gotten this yet? I've been looking for one for awhile and I didn't see the range of adjustment on it. Looks like a quality piece just curious if anyone has taken the plunge yet.

Would any one know the seat height difference between the DP race seat and OEM? Or where you would measure it from? Thanks.

Anyone know (approximate is fine) what the relationship between turns on the ride height adjuster is to ride height? I didn't really notice last summer when switching from the Pirelli to Q3 rear the subtle difference in turn-in caused by the ~3mm difference in height. But having run a Pirelli...

My 1199 spends 99% of it's time on the daily commute, and most of that is in heavy London traffic so i'm finding covering the foot-brake really tough due to the general riding position. I was looking to not change the height of the pegs as such as the general height works for me, but rather...

Anyone know what the range of length is for the stock OEM ride height adjuster, in mm? (usually measured eye to eye)

So, we have reports of a different seat, which made me wonder about height. Ducati very usefully claim the following on their website: 899 - 830mm (32.48in) * 1199 - 825mm (32.48in) How very helpful :rolleyes: Guess we need some bum on seat input :p

Hi Guys, Has anyone changed the height of the swingarm on their 1199R yet? If so, is it very difficult and does it require special tools? Do you think it would make a noticible difference to the handling of the bike? Thanks.

I trying to adjust the height ( I want to lower it) of my shift pedal / lever. It's way to high. I wen I shift gears I feel like I have to lift my foot off the peg to bring my foot up high enough to engage the next gear! I've tried twisting the linkage but it doesn't to seem to do anything?

Hi all I have a big problem with seat height and its gona get a heap worse when my comfort seat arrives so my question is this why done owners with same problem simply adjust the rear suspension linkage to lower height I know geo will change from factory setting but any one thing of any other...

I've read some discussions recently where the Kyle Racing Ride Height tool was discussed, but it doesn't seem available yet. I've seen this for ~$70, is there any meaningful difference? CORSE DYNAMICS Ride Height Tool: Ducati 1199 Panigale

I have read a few posts on this, sorry if repeated but i don't think so!, however speaking to my local dealer the "Map n sprocket UK kit" is not out till " March " at best and if you go up to 41 teeth on the rear a longer chian will be required, longer by 1 link !! Surely you can keep the...

Adding the comfort or racing seat to the 1199 adds height, which for some can make the overall bike height an issue. Sato racing is the first on the market to provide a -20mm height adjustment, picture attached and ride height adjustment comparison is here ...

Has anyone had the opportunity to compare the height and adjustment on both these rearsets fitted? I find the DP a bit too high even on the lowest setting - I was hoping the Rizoma was better but from what I can see it also has on two height settings. Worried that I might end up with the...