torque

Can anyone recommend the torque setting for the bolts on the brake calipers. My pads started squeeking at 3K miles and I need to check them.

White/ Black/ Lava Red in size 42 L boot is missing inside trim piece. Track used never crashed. 140 shipped CONUS in box

I'm looking for a torque spec on part number 77916763AA it's the "special screw" that holds the sub frame under the gas tank in front of the seat. Ive looked everywhere and I cannot find this specific torque.

Hi all, Looking to verify that I have my terminology correct first off- The piece that the rearset connects to (it has two bolts that go into the engine block and one that secures a clamp around a pin coming out of the swing arm).. I believe this is the "LH/RH PIN SUPPORT", but not sure. If...

Hey guys I'm getting my V4s here in a few days and I got the CNC racing clear clutch cover/pressure plate for it. I just wanted to confirm the torque specs. From my research the pressure plate is 9-11nm and the clutch cover is 3-3.5 Nm. Let me know if this is correct? Thanks in advance

Hello all and thankful for any help! New to this sight and Ducati. I have replaced my rear wheel due to a bent rim. I can't seem to find proper torque setting. I ran iy to 110 nm, but that locks down rear wheel. Seems way to tight. Again any help is appreciated! Just to be clear this is 1200...

I have recently bought a Constand and it requires removing the frame bolt and using a spacer - does anyone know what the torque setting is for the bolts please or where I can download something? :) I can't upload a picture but it's the bolt that is visible on the silver frame that some people...

Hi, I need to replace the Engine Oil Pan Sump on my 1199s 2013 mod. Does anyone know the torque settings to use for the bolts? With regards Magnar Seljevoll

I recently sourced an Italian list of the Panigale V4 torque settings. I have been busy translating it back into English over the last fortnight, which is not easy, due to a lot of specific and technical terminology used and had to cross-reference with the Italian parts catalogue to identify...

Hi guys can someone tell me the torque setting for the bolt shown in the pic please? SEE HERE Many thanks :)

Anyone...? Pinch bolts Front Caliper Front Axle Rear Axle Nut 1199 Values in newton meters are: 16 45 63 230

Curious if this was happening to anyone else... Behind the radiator on the header there is a torque screw (in the US). The weld holding the thread in somehow blew. The first time this happened (on the track) the heat or flames from the exhaust melted my kickstand sensor causing my bike to...

Anybody knows the torque specs for the bleeder valves (master cylinders and calipers) front and rear?

Does anyone have torque specs for the V4 or older Panigales at least? In particular I am looking for front axle nut torque, but other nuts and bolts would be handy too. Thank you

Anybody knows the torque for the 4 Allen screws that hold in place the passenger foot pegs bracket under the tail frame? I can't find it in service manual and please don't say "snug" if you don't know the answer. Also, what would be the torque for the 2 smaller bolts that connect each...

Question - Is the torque spec for the 1299SL same as all the other bikes.. 230Nm ? cheers

I have been running Tuneboy on my 2016 1299 standard for around a thousand miles now and I finally decided to try the linear torque setting. It's really great. Very smooth throttle response, no dip in power delivery anywhere. I commute to work every day on the Pani and with the linear torque and...

Afternoon people, After looking through the forum I found this thread http://ducati1299.com/mechanical-technical/16090-all-torques.html on torque settings for the 1199. I can't see one for the 1299. Are these valid for the 1299s? If so great. If not does any know the values for...

Hello, Does anyone please have the torque specs for a 2012 1199S-ABS (all pretty much the same model wise) for: Magneto side cover bolts Kick stand bolts Swingarm mount adjusters and bolts My phone is old and my computer is down, so I really can not search Thank You much!

DAINESE Torque D1 Out Air Boots $389.95 * FREE SHIPPING The latest iteration in the Torque series, the Dainese Torque D1 Out Air Boots combine several generations of organic and sculptural shape with a more refined and dynamic fit that offers one of the most comfortable and secure boots on...