valve

Using this tool, is it correct in stating that I should be able to measure all 4 points for valve clearance? Or must I not use this tool and rotate the motor to find rest for each of the 4 points. Confused as the measurements I’m getting are kinda out to lunch from what I expected to see on...

For those of you who put on aftermarket exhaust (full systems) on and removed the flapper valve on the V4 how much torque did you lose in the low and mid range? If you did not Dyno it please let me know how your Butt Dyno felt. Im debating on the full system for the V4 but i don't want to lose...

Disconnecting Exhaust Motor Valve Hi all, is it possible to simply unplug the exhaust valve connector on the V4 without it throwing a check engine light? I did this on my previous Panigales and never had an issue, but have read mixed reviews here. I'm not trying to mechanically disconnect...

I'm replacing my timing belts and checking my valves for the first time on my own. I have watched many videos and read alot of post. I wanted to get more clarification on step by step what I need to do. Is there any video out out there that goes in detail start to finish on how to mark the...

Does anybody know of any company that makes angled titanium valve stems (8.3mm for our Ducati's)? I can only find valve stem caps online... let me know! Thanks.

Just as it says, looking for an 1199 magnesium clutch side case for my 899, magnesium oil pan and valve covers. Also looking for a slipper clutch and blip box for an 899. Feel free to post, PM or text me. (720)204-0541 Thanks - Aaron Edit - Found a clutch case still looking for the rest Edit...

Looks like its missing parts, is it for aftermarket? Maybe they use this parts for multiple bikes Is this where NOS goes?

Anybody knows the torque specs for the bleeder valves (master cylinders and calipers) front and rear?

On the 959, is this a common mod? Was wondering if it had any downsides, other than a little more noise from the stock exhaust at lower RPM... I have done it on other bikes to get rid of some surging at the area where the valves opens and closes, plus some bikes it gets stuck, or squeaks...

Hi all, About the exhaust servo valve on the 1199. Is this the right connector to unplug?? No issue or errors codes removing it??? I bought a vizi-tec servo valve eliminator but it doesn't fit. So maybe just leave it unplugged instead? Thanks

If you're like me one of the first things I do on my new machine is to disable to exhaust valve. On previous bikes (1X98, 1199) ive accomplished this by simply disconnecting the cables and even leave the unit on the bike ...just incase I may need it for a track event wit strict noise...

When fitting larger race rads and oil cooler, is there really any benefit in dumping the thermostat valve from an overall running temp perspective? As I see it, the thermostat will allow water to short circuit in the motor until it is up to temp, after which it diverts it out through the rads...

I have an 1199s and iv had the same issues with valve cover leaking less than 1000km after repair.. is there an after marker rubber seal that is more reliable the the oem ducati rubber seal

Yesterday I mounted the akra (slip on) on my 959 panigale, the bike is totally changed, I'm too happy. I have a questione, have you removed the valve motor to the exhaust by putting the appropriate cap?Or is it better to leave it attacked? I put the cap on but the engine warning light came on...

Just wondering if anyone has had any issues with the 24k valve service on the 2015 1199R?,seems like a long time for a race engine. thanks

So what do you think? New v4....less vibrations loosening valve cover screws and causing oil leaks on you shiny exhaust mufflers Like the twins always do??? Im excited lol

the valve cover of the 1299 has the same size as that of the 959? Can they be exchanged? :confuso:

CNC Racing Brembo Bleeder Valve Covers (Brembo) $34.99 * FREE Shipping The universal billet bleed valve cover kit is CNC machined from light alloy billet and then given a colored anodized surface finish. The kit consists of 6 caps to install over the Brembo master cylinders, calipers, clutch...

I know this topic has been discussed on here, I mentioned to my dealer it's been said that disconnecting the cable from the servo may reduce heat build up? He says no it will make no difference? And it may throw a code? Guys what's the consensus to removing the cable from the valve ? I see the...

Hello, My 1199R is currently being repaired at a dealer wherein they are replacing my valve guides, given they were faulty. After 15K miles, during it's first valve adjustment, it was noted that there is significant/excessive play between the valves and the guides. I am looking for a...