1199 died and wont start

Ducati Forum

Help Support Ducati Forum:

Joined
Jun 27, 2019
Messages
13
Location
Croatia
Hello guys.
Yesterday i had my 1199 started and drived around 80 km. It was all fine, and started normal, and sudendly he died in corner when i press clutch and rpm fall to idle. After that i stoped and I cant start it anymore. Screen is black, when i turn ignition, no fuel pump noise. I conected it to power source and battery was 2/8 and after whole night it was 4/8. After whole night and day, batter was full, but still same. No fuel pump sound and screen is black. Its 2012 pani, with 36.000 km. I allready had that problem last year, but after few hours it started and I drove it to Ducati and they said that key lock lost comunication with computer becouse voltage drop. They removed stored error and it was ok until now.
 
Did you install a new battery? A damaged battery can show a resting voltage of 12-14v but that doesn't mean it still has the cranking capacity to start and run the bike.
Either that or you've got a bad connection somewhere as the bike died mid corner..
 
I have instaled new batery last year, and I didnt had this problem whole year. Well if its the battery I think it will at least run the fuel pump or screen.
 
Last edited:
Ducati service said it was fuel pump relay wich burned out.
There is no possibility to order new connector for relay, so they need to check wire and maybe replace whole wire with connector for relay.
Wierd thing is that when we connected new relay, bike turned on fuel pump and screen, without key. Started normal with key.
 

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Back
Top