2012 early model clutch issue ?

Ducati Forum

Help Support Ducati Forum:

Joined
Dec 14, 2013
Messages
98
Location
Belgium
Wanted to go riding today. First real trip after buying the bike back in december.
Ended up taking the Yamaha :mad :mad:
I fired the 1199 up, found the clutch feeling like no lube was in there, i could pull it in completely without any resistance at all. The bike had a last service 11months ago at 2500km, now 2600 on it. It stood still for almost a year.
Will call the dealer nest week.
Anyone with 2012 model with simular issues, it doesn't look like an oil leak issue tot me.
2012 1199S ABS
 
Last edited:
Try bleeding the slave.if it is still not working remove the slave clean out the inside of the slave reinstall and bleed it again should work. I have replace my slave with a cnc slave and no issues so far.
 
same issue. bike would not go to neutral and no tension in the clutch lever. bleed the air out of the clutch slave and then the master. takes only a few mins.
 

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Back
Top