Another way to mount navigation, phone, GoPro to 1299

Ducati Forum

Help Support Ducati Forum:

That's pretty cool tinus675! Perhaps the least vibration I have seen, and I like the fact that you can see the handlebar/steering movement.
Where can you get the accessory from (GoPro Key Mount)?
Is it sitting in tightly locked? I also wonder if it works for larger GoPro (Hero4).
 
MrBIgBiker said:
for the damper mount
Click to expand...


This is what I use works perfect.. Just mount the rubber plug in the steering stem hole and tighten up the nut you can then mount anything you want to the Ram Ball and it is not in the way at full tuck..

Speedy
 
Sky said:
That's pretty cool tinus675! Perhaps the least vibration I have seen, and I like the fact that you can see the handlebar/steering movement.

Where can you get the accessory from (GoPro Key Mount)?

Is it sitting in tightly locked? I also wonder if it works for larger GoPro (Hero4).
Click to expand...



Cool man. The gopro was set to LINEAR, will check what it looks like in wide.
There is no accessory, I removed the standard Clip-In footplate from the gopro, modified the key thickness with a blade and slid it between the grooves of the gopro case. Put a 4mm bolt and nut through.

I must say, I thought it was going to vibrate, but because this connection is not straight onto the suspension and I think the movement in the key itself absorbs vibration, or the session 5 gopro has amazing image stabilization..... Check the fluids in the reservoirs go ballistic!

524b30541bac9214faf89d2a9e12aa7e.jpg
 
I made this out of a bit of aluminum plate, a piece of tubing and a couple of long bolts

GoProMount3_zpslltv5vpg.jpg


GoProMount2_zpshwxbpuxc.jpg


Video from this position

[youtube]sMQ892awwBA[/youtube]
 
I would be afraid that eventually the vibrations would screw up the tumblers in the ignition lock? They Key seems like a pretty flimsy mount and would vibrate a lot.. Just an impression I might be wrong..

Speedy
 
speedy14 said:
I would be afraid that eventually the vibrations would screw up the tumblers in the ignition lock? They Key seems like a pretty flimsy mount and would vibrate a lot.. Just an impression I might be wrong..

Speedy
Click to expand...

Agreed, I don't even hang anything else on my car keys. Not good for the ignition switch.
 
When i use the stem mount my tom tom sticks out too mch and it looks out of place, i really do not recommend using tom tom charger with mount.
 
ChrisE said:
I made this out of a bit of aluminum plate, a piece of tubing and a couple of long bolts

GoProMount3_zpslltv5vpg.jpg
Click to expand...

I could have made the aluminum plate a little smaller, but if doesn't interfere with anything and it gives me options if I change out cameras that may have a different shaped mount.

The red aluminum anodized GoPro mount has a 1/4x20 threaded hole, so it's actually bolted, from underneath, to the plate.
 
Can you provide a link to this? Been trying to find it, no luck though :/

tinus675 said:
Anybody tried this way to mount gopro?
I like it, sits in a good spot out of view. Gets a nice wide view and instruments. And you always remove the key when you get off anyway.
Vibration and movement might kill it, but I have to go for a ride to test.

f4f7a81cba273f31c35736ab145344aa.jpg
Click to expand...
 
ChrisE said:
I could have made the aluminum plate a little smaller, but if doesn't interfere with anything and it gives me options if I change out cameras that may have a different shaped mount.

The red aluminum anodized GoPro mount has a 1/4x20 threaded hole, so it's actually bolted, from underneath, to the plate.
Click to expand...

That's an awesome set up :)
 
Sky said:
Thought someone may find this useful...

Basically, taking advantage of the hole at the other end of the left handlebar (you need to take the rubber cap off). Took me less than 5 min to get the ball installed inside (from SW-MOTECH). I have RAM accessories, and could fit my GPS, GoPro and iPhone 6 Plus perfectly fine.

Cheers!
Click to expand...


Could you provide a link to this kit? I cannot find this kit with Go pro mount.

I can only find this or this

I just want to mount a go pro, thats all.
 
KvalheimRacing said:
Could you provide a link to this kit? I cannot find this kit with Go pro mount.
Click to expand...

The article number is:
SW-Motech: Article #: CPA.00.424.16000/B

Link to their site:
Sat navs attachment for sport bikes, ball mounting on the motorbike handlebar.

Having said that, I also bought the Desmoworld cam mounting hub (link below). A bit pricey but I have to say, it looks beautiful on th bike! It looks as if it came with the bike... I am traveling, but when I return I can send some pix.

Kugelkopf Ducati - Ram Mount - 899-1199-1299Panigale - 848-1098-1198-Hypermotard-Monster-usw
 

Similar threads

Vicati
For Sale Panigale 1299s and Panigale 959 Full bolt ons
Replies
11
Views
528
Vicati
Vicati
duc
Ducati announces new 2023 Multistrada V4 Rally
Replies
0
Views
1K
duc
duc
M
How-to: Side mount steering damper
2
Replies
31
Views
5K
JHTmcrider
JHTmcrider
0
11 Day ~6200 mile last minute ride
2
Replies
21
Views
6K
0612Devil
0
luke
How to mount Android phone?
Replies
10
Views
4K
Zaid1199
Z

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top