Custom fender eliminator

BUCCI said:
It is glossy, it came with the full termi system.
Click to expand...

Oh , ok. Looks nice. Two questions : does that whole undertail just snap into place ? And , did you have to drill any holes for any part of this or the plate mount's install ? Don't .... us on the prices , and I bet you will sell a ton of these. Especially if you offer different options like plastic , glass , matte or glossy carbon. RED GLOSSY CARBON ( like these mirrors from LighTech )would look sick !!!!! I'm planning on using these mirrors. Here's a link to OPPRacing.com

LighTech Red Carbon Fiber Mirrors for Sportbikes - OPPRACING Products
 
SeanPatrick said:
Im in for that cover, How much??? SPM
Click to expand...

I do not have a price yet, more information will be available soon.

Theefiveoh said:
Start cranking those puppies out! And I agree, there is no real need for CF or FGlass. Stick to the plastic look you already have. Maybe CF in the future, but not immediately. I bet just about every swinging .... on this forum will want one, also granted they are at a reasonable price. Post this up on 1199forums and you will get even more interested peeps.
Click to expand...

I am in a holding patter until Monday but I will have some soon hopefully. Also in the process of making rear turn signals and mirror block off plates with and without turn signals. I will update you guys as soon as I have an ETA and price.
 
2012DUCATI1199 said:
Oh , ok. Looks nice. Two questions : does that whole undertail just snap into place ? And , did you have to drill any holes for any part of this or the plate mount's install ? Don't .... us on the prices , and I bet you will sell a ton of these. Especially if you offer different options like plastic , glass , matte or glossy carbon. RED GLOSSY CARBON ( like these mirrors from LighTech )would look sick !!!!! I'm planning on using these mirrors. Here's a link to OPPRacing.com

LighTech Red Carbon Fiber Mirrors for Sportbikes - OPPRACING Products
Click to expand...

The rear cover snaps in with 8 clips and is held in by the 2 outer body panels of the tail. I am working on making the rear covers in multiple materials.
 
Theefiveoh said:
Any updates Bucci? Still chomping...
Click to expand...

Rocky907 said:
x2. :D
Click to expand...

I apologize for taking so long after saying that it should only be a matter of weeks! Good news is that I have found a company that can make the part! The issue has been making these in a cost effective manner, but I have figured out how to make them at a price that is desireable for you guys. It will be a few weeks due to the busy schedule of the vendor that will be manufacturing these for me but I will be doing my best to get these made quickly and correctly. I also have some hidden rear LED turn signals in the making along with mirror block off plates with and without LED turn signals in them. I will also be making panigale specific GoPro mounts, clutch and brake reservoirs, foot pegs and a few other items. I am very excited about the products I wil be putting out and hope that you guys will like them. I will do my best to get them out fast and keep you guys updated. Thanks for your interest!
 
Thanks for the update! Im excited to see what you come up with and the final FE product. I was considering sending my Yoshimura block off plates to tripageled.com to see if he could put some turn signals in them. I may have to wait and see.
 
That really looks nice and clean. Too bad in VA, the troopers would give me a ticket for tag lights!
 
knutts said:
That really looks nice and clean. Too bad in VA, the troopers would give me a ticket for tag lights!
Click to expand...

Working on that as well as turn signals :D just taking a while because I want it to be perfect and not just another kit...
 
Theefiveoh said:
I'm itching like a crackhead...any updates for that FE "ugly hole cover upper piece"?
Click to expand...

falco said:
Updates?
Click to expand...

Sorry it is taking so long, still waiting on the plastics manufacture.

mangler7 said:
True.

1. Angle it forward (top of plate more rearward then bottom) slightly.

2. Add a LED light to illuminate it.(required).
Click to expand...

There will be multiple versions available, one will come with a light for the license plate.
 
UPDATE:

The first of the prototypes are on the way! They should be here in 1-2 weeks. If the fitment is good and I like the shape then I will put in a large order and they will become available for purchase.
 

Attachments

  • 7883982258_c715a0fed8_b.jpg
    7883982258_c715a0fed8_b.jpg
    13.6 KB
I spoke to comp werks yesterday. theirs will be on their site end of this week. signals are led going in the side vents. about a month from now they should have intergrated tail lights. hope this is true getting tired of waiting.
 

Similar threads

T
For Sale Various Ducati Streetfighter V4 Parts - Los Angeles
Replies
10
Views
427
ttpark
T
M
For Sale Ducabike Complete Clear Clutch Cover Kit w/Pressure Plate & Flange & Other Goodies
Replies
5
Views
240
MdDuc
M
E
eliminator for electronic suspension
Replies
0
Views
64
Elio
E
C
For Sale 2018 Ducati Monster 1200 R For Sale
Replies
0
Views
305
cardre9
C
Cadreaming13
For Sale 2020 Ducati V4 Random Stock Take Off's
Replies
2
Views
70
Cadreaming13
Cadreaming13

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions