Ducabike/jetlrime Kill switch

Paul G said:

● Enter the SETTING MENU.
● use the navigation buttons to select "Pin Code"
option and press ENTER button.
If the Pin Code has never been activated, this menu
will include “New Pin” item to activate it.

Click to expand...

Paul G said:

Maybe go back to stock and see if it reappears, possibly a security feature?

Click to expand...

Mick1976 said:

I haven't looked to see if JP makes anything for the V2/V4 (Siemens) so that's why I questioned a pin missing so it all makes sense now why the bike won't power up.

Click to expand...

Abdell Al said:

Motowheels just responded to me today, they say their vendor confirms that it’s made for the panigale v2 2020, it should work!
Also I went back and saw the female out of the immobilizer also has 6 wires! Bike’s male has 5!
This is so frustrating! I’ve ordered a replacement for the kill switch as the harness isn’t functioning properly! Let’s see how that goes! Also took the battery out, ran a load test, it’s fine! In addition, I checked the fuse box and they’re all fine! Something doesn’t add up. Dash lights up, generic fault sign is on, I try to fire it up and nothing it!
Thank you for your replies mate

Click to expand...

Hra said:

I don’t know about the V2, but I‘ve ordered a ducabike kill switch for 21 V4 from motowheels and they sent me KS03 and I had the same issue with the 5 active pins instead of 6. So Iordered the correct one from Ducabike which is KS04 which has a different wiring harness And it worked.

Click to expand...

Mick1976 said:

Yeah so you ran into same issue he did that why there is different part numbers and the wiring is different. Bet his is a KS03 (Mitsu) and KS04 is Siemens V2/V4.

Click to expand...

Mick1976 said:

Yeah so you ran into same issue he did that why there is different part numbers and the wiring is different. Bet his is a KS03 (Mitsu) and KS04 is Siemens V2/V4.

Click to expand...