flashing/blinking oil lamp

Ducati Forum

Help Support Ducati Forum:

Joined
Jan 31, 2012
Messages
30
Location
norway
flashing/blinking oil lamp and BBS failure

Hello!

Is there anyone here who has problems with flashing oil lamp?
After upmap and oil change it started to blink!

and sometimes popping up BBS error code, and then will not start

i hope to hear from you and your experience
 
Last edited:
My oil light kept blinking with the ignition On as well as when the engine was running after the new map update. No error codes and it would start without issues.

It took them almost 10 days to figure it out and finally told me that it was a faulty ground on the oil pressure sensor.
Hope this helps.
 
I have the same problem, luckily the service tech found the pressure ok. They are suspecting a faulty presure sensor also. If you start the bike immediately after key-on (before the pressure light illuminates), the light stays off. Let me know if your dealer finds something else wrong, since my problem may be the same. I'm going to have the presure sensor replaced on Saturday.
 
My bike has been doing the same thing unless I start the bike immediately after key-on like Lotto suggested. Taking it to the dealer tomorrow for further troubleshooting.
 
Mine did this it was a faulty oil pressure switch, it was replaced under warranty.

Cheers
 
Mine is doing that occasionally too. Was just on for the 40mi ride home and its a terrible feeling with it on..
 
Hi! My R started doing it at the first Day I rode it. Replacing the oil pressure sensor solve the problem or it returns later?
I Will be at the dealer for the first oil service and would like to have this fixed.
 
Last edited:
Check for moisture in the oil pressure sensor switch, under the connection cap. Try spraying a dispersant into the recess, such as ACF50 and into the plug as well. If it still plays up, then the sensor is probably at fault
 

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Back
Top