Front fairing bracket 1299/panigale R
- Thread starter junior81
- Start date
Help Support Ducati Forum:
- Joined
- May 18, 2014
- Messages
- 504
- Location
- London, UK
Really appreciate the offer mate, but it's probably a lot of hassle to get it to the UK and shouldn't be too much trouble to find someone to make something here. Cheers for the tips on the rubber mountings, could cause a problem with my cable ties!
- Joined
- May 18, 2014
- Messages
- 504
- Location
- London, UK
Just to make clear for anyone looking at the thread and seeing my earlier cable tie mounting job. This method of mounting does not work. I had a nightmare at the track with the IMU cutting the engine. I think it was due to vibration but I'm not certain. Definitely requires a good quality mount. I turned all the electronics off because of the problem and ended up losing my high side virginity! fortunately the bike stayed upright and just damaged the fairings.
Do they have a website or just the facebook page?
Would you mind telling us how much their bracket cost?
- Joined
- May 15, 2012
- Messages
- 54
- Location
- Norway
Hi!
I think only a facebook page, https://www.facebook.com/uhr.tec.design/?fref=ts
Also not sure how much they cost, just send him a message!
We have also the IMU support bracket from Corse to avoid vibration, it can be ordered from your Corse dealer.
I think only a facebook page, https://www.facebook.com/uhr.tec.design/?fref=ts
Also not sure how much they cost, just send him a message!
We have also the IMU support bracket from Corse to avoid vibration, it can be ordered from your Corse dealer.
- Joined
- May 18, 2014
- Messages
- 504
- Location
- London, UK
Thanks, do you use this with the UHR-Tec head stay or with the stock one?
endo, do you have pics of the Motoholders 1299 fairing bracket? I saw some pics online and don't see how the IMU would mount up to it.
Is there also a provision to attach the DDA GPS unit to that as well?
- Joined
- May 15, 2012
- Messages
- 54
- Location
- Norway
We use it with the UHR-Tec one
do you have pics of what that looks like?
I saw pics of their bracket but i don't see how the IMU mounts to it.
There's a square aluminum bar behind the bracket for the dash, but I can't picture how the IMU mounts to that
- Joined
- Mar 2, 2016
- Messages
- 30
- Location
- Houghton Le Spring uk
It has a manufactured bracket on the rear of the clock, it fits perfectly
I have had the Motoholders race bracket for a while as well. The one i just got is the street version of that holder with the stock fairing/mirror mounts and the headlight bracket. i think the corrected version ( i apparently got one of the first originals that was not correct). Have not mounted it up but it to has all the correct provisions for the accessories.
Are the ears for the mirrors in the correct location?
If you have the street version, does the IMU still mount to the headlights or have you moved it to it's dedicated mounting location on the back of the fairing stay so that when you take it to the track, you just have to remove the headlights only?
Also, did you get the one with the fiberglass or carbon air intake? I'm not entirely sure it's available with the street version though
Good question. On the first one i got the "ears" were not even close. This one looks close but i have not actually mounted it to anything so I would be guessing. As far as the IMU is concerned its mounted in the stock manner.My IMU mounts to a bracket not the headlight. I made my own carbon intakes to work with the headlight. The intakes they sell should work as the intake tunnel and frame mount configuration on the race piece for the 1199 and this look to be the same.
Similar threads
- Locked
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
