ID handlebars

topolino · Feb 1, 2017

Did not mark these when I removed them from the bike. Any ideas as to which is left and which is right?

Gecko · Feb 1, 2017

The one with the very tiny hole (appox 1mm diameter) is for the right side (used by the throttle housing).

hawaiiduc · Feb 1, 2017

The one with the tiny hole is for the metal pin on the throttle side. Hope that helps.

topolino · Feb 1, 2017

OK here is another couple of pics to clarify. The bottom bar has been rotated to show the second small hole. So is the top tube left or right. These are different to the 1199. The top tube has one small 1mm pinhole. The bottom one has two small holes but countersunk and about 2mm each.

Sky · Feb 1, 2017

topolino said:
OK here is another couple of pics to clarify. The bottom bar has been rotated to show the second small hole. So is the top tube left or right. These are different to the 1199. The top tube has one small 1mm pinhole. The bottom one has two small holes but countersunk and about 2mm each.

Attached are the pictures from workshop manual (pages 579 and 580).

Based on this, the lower handlebar in your picture is Left and the upper is Right. This also matches the other responses in this thread.

Good luck

ID handlebars

Help Support Ducati Forum:

topolino

Attachments

Gecko

hawaiiduc

topolino

Attachments

Sky

Attachments

Similar threads

Register CTA

Recent Discussions