Mirrors - ..... Question

Chis · Apr 3, 2017

I apologise in advance if this is a totally stupid question. Won't bore you with the details, but I bought my Anniversario from a guy who had never taken it out and he trailered it over to me so it was unridden - nice for me!

Anyway, the bike came to me with all of the various bits and pieces that you'd expect including the mirrors as the bike was fitted with the blanking plates. This weekend I thought I would actually fit the mirrors, but when I took the blanks off there was no hole to pass the cable through and no corresponding connector or cable on the other side to plug it into in any case.

There are no cables in the box of bits either!!

I am a bit stumped - especially about the 'missing' hole for the wire - anyone put me out of my misery and tell me how stupid I am being.

Thanks in advance!

RetardedTiming · Apr 3, 2017

There's a plug that is probably tucked down inside the support bracket. As small 's the plug is you still have to tuck it away so it doesn't interfere.

Sent from my LG-H901 using Tapatalk

John Russell · Apr 3, 2017

I agree its tucked in there somewhere, its a bit like "hide-n-seek", look for the plug deep inside the front fairing beside the headlamp seal, but please don't put those "cow horns" on an Anniversario, put some "litetec" teardrops on. You can't see that well but they look good

Twistedracer · Apr 3, 2017

This little white plug will be tucked in the channel of the fairing support. If it's further in you'll need to romove the upper fairing to retrieve it.

tyguidry · Apr 3, 2017

Twistedracer said:
This little white plug will be tucked in the channel of the fairing support. If it's further in you'll need to romove the upper fairing to retrieve it.

Twisted, I did the NRC signal/mirror deletes. Had a hell of a time tucking the wires down inside there. When the upper fairing is removed does it open up a fair bit of space to hide/tie the wires?

Twistedracer · Apr 4, 2017

tyguidry said:
Twisted, I did the NRC signal/mirror deletes. Had a hell of a time tucking the wires down inside there. When the upper fairing is removed does it open up a fair bit of space to hide/tie the wires?

When you pull the front fairing and cowl you'll be able to zip tie it. Be sure to keep the wires off the porcupines if you have led's.

Mirrors - ..... Question

Help Support Ducati Forum:

Chis

RetardedTiming

John Russell

Twistedracer

tyguidry

Twistedracer

Similar threads

Register CTA

Recent Discussions