[Panigale V4R] Replace clutch cover

ducarpit · 2025-03-12T10:49:11-0700

Hi all,
i want to replace the stock clutch cover of my Panigale V4R 2022 with a carbon one, such as this in the pic:

dry-clutch-aluminum-cover-ducati-streetfighter-panigale-v4.jpg

I need to know if the replacement will be an easy activity due to the dry clutch (no oil).
Moreover, i ask you if someone know the exact screws tightening torque.
Thank you so much in advance.
Christian

panibadboy · 2025-03-12T12:31:37-0700

ducarpit said:
I need to know if the replacement will be an easy activity due to the dry clutch (no oil).

very easy

For the 2022 Ducati Panigale V4R, the dry clutch cover bolts are typically single-use aluminum screws with Torx heads. The recommended torque specification for these bolts is 3.5 Nm, followed by an additional 10 degrees of rotation. After initial installation, a check torque of 9-11 Nm is advised. ducatiforum.co.uk

It's important to note that these bolts are designed for one-time use due to their material and design, which ensures proper clamping force and reliability. Reusing them may compromise the integrity of the fastening. Therefore, it's recommended to replace these bolts with new ones whenever the clutch cover is removed or serviced.

baggerman · 2025-03-12T14:08:15-0700

ducarpit said:
Hi all,
i want to replace the stock clutch cover of my Panigale V4R 2022 with a carbon one, such as this in the pic:

View attachment 60156
I need to know if the replacement will be an easy activity due to the dry clutch (no oil).
Moreover, i ask you if someone know the exact screws tightening torque.
Thank you so much in advance.
Christian

All good until you drop it and the clutch is taken out with it. And those magnesium outer cases are fragile and expensive, case savers are a better idea. If you're just use the bike to hang out at poser perk, probably be ok.

[Panigale V4R] Replace clutch cover

Help Support Ducati Forum:

ducarpit

panibadboy

baggerman

Similar threads

Register CTA

Recent Discussions