RCS 19 Lever Wiggle- Bushing Kits Available?

Ducati Forum

Help Support Ducati Forum:

M

MdDuc

Supporting Member
Joined
Jun 21, 2015
Messages
810
Location
DirtyJerz
So on my bike that I'm currently marketing to sell I noticed yesterday that I have excessive slop in both my clutch and brake levers. Appears to me that the bushings inside the lever themselves where the master cylinder mount bolt goes through is worn to all hell on both of them. I doubt its the bolt... I attached a couple pictures showing the gaps. I looked all over and don't see anyone selling a bushing kit. I bought this bike with the RCS19's and brembo folding levers on the bike. Id prefer to go back to OEM levers since I'm selling the bike but I don't believe they mount the exact same in the RCS19's I believe.

Anyone have any advice here? I don't care about the slop on the clutch side but on the brake side the slop causes the micro switch to not be made keeping my brake light activated nonstop and its driving me crazy.
 
If you have some stock levers around you may be able to recycle some bushings.

I just measured some OEM ones I have in a spares box. They are L .851" OD .474" ID .317"
 
bp_SFV4 said:
If you have some stock levers around you may be able to recycle some bushings.

I just measured some OEM ones I have in a spares box. They are L .851" OD .474" ID .317"
Click to expand...

do you have both oem levers you might be willing to part with? What about OEM clutch/brake master cylinders?
 
I have both OEM levers I'd sell but no on the masters.

The levers fit different than the Brembo ones though. There's a circular piece with a rod/plunger on it which is meant to interact with the master.
 
Last edited:
The Brembo master that came wt my new ‘24 V4S is adequate, but I much prefer the 19 Corsa Corta that I had installed on my former CBR SP1 for the past 3 years.
I don’t claim to know the calculation of caliper vs master.

Would this be a good fit for these Stylemas on my V4S? I prefer little to no modulation and fairly instant-on front brakes.
Please advise, thank you.
 
J D V 4 said:
The Brembo master that came wt my new ‘24 V4S is adequate, but I much prefer the 19 Corsa Corta that I had installed on my former CBR SP1 for the past 3 years.
I don’t claim to know the calculation of caliper vs master.

Would this be a good fit for these Stylemas on my V4S? I prefer little to no modulation and fairly instant-on front brakes.
Please advise, thank you.
Click to expand...

If you’re on track try out some Z04 pads
 
SuperDomestique said:
If you’re on track try out some Z04 pads
Click to expand...

I’m wondering if the 19 is acceptable on my V4S. I’ve done decades of track days, now just a handful/season.
Mainly use the Duc for very early am weekend rides on fast mountain roads wt an experienced group at a similar level.
 

Similar threads

NYCV4S
'23 DUCATI V4S - SPARK RACING TITANIUM FULL SYSTEM / REPLICA WSBK 2023
Replies
1
Views
853
NYCV4S
NYCV4S
Vicati
For Sale Panigale 1299s and Panigale 959 Full bolt ons
Replies
11
Views
1K
Vicati
Vicati
M
  • Locked
SOLD! 2020 Panigale V4 Base 10K LOADED *Full Akra, S Wheels, DP rearsets, carbon fiber everything, Pro-ti hardware, RCS19 $22,500 NJ
Replies
4
Views
609
Steven31371
Steven31371
S
SOLD! 2017 1299 base - complete part out (second thread)
2
Replies
36
Views
2K
Haloav13
H
S
  • Locked
SOLD! 2017 1299 base - COMPLETE PART OUT
2
Replies
36
Views
2K
SirJAG
S

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top