Recognize this piece?
- Thread starter Monsoon
- Start date
Help Support Ducati Forum:
Think I found it. Looks like from one of the fairings on the side of the gas tank. There's a little nipple in between the velcro. The left side has a rubber grommet on it but the right side has a nipple without a rubber grommet and the nipple had lithium grease on it. I'm assuming that probably where it goes.
- Joined
- Jul 10, 2020
- Messages
- 6,169
- Location
- Midwest
Yeah, they always pop off when removing the fairings. If it’s the really small one it fits in a groove cut into the gas tank. There’s also a larger one which fits onto a metal stud on the frame. That one is normally fit into a hole in the fairing.
Shoot. I put back together my bike after doing the slip ons. This bolt was in the group of exhaust parts. I went through all the instructions to determine where this came from and I am at a loss. As you can tell it a bit dirty. My bikes are usually 9.5/10 for cleanliness so this tells me it's from down near the bottom. I'm going through everything and am stumped. Any of you gurus have an idea? Much appreciated. Thx. I gotta start using a camera step by step what I'm doing
Attachments
- Joined
- Jul 10, 2020
- Messages
- 6,169
- Location
- Midwest
Are all of the frame to engine bolts accounted for?
- Joined
- Apr 8, 2021
- Messages
- 68
- Location
- US
These are called bonus parts. Each time you work on the bike and find a bonus part it goes into a drawer. I have drawers of these for my car and bikes.
Similar threads
