Slave Cylinder..

Ducati Forum

Help Support Ducati Forum:

Joined
Nov 4, 2012
Messages
2,118
Location
Northern Virginia
Leaking again so I think I'll replace it. What are you guys running? I have looked at Oberon, Evo, Yoyodyne and EVR.

Thanks!
 
Leaking again so I think I'll replace it. What are you guys running? I have looked at Oberon, Evo, Yoyodyne and EVR.

Thanks!

I assume you mean the clutch slave cylinder. I have never had one leak on any of mine. I have removed them and cleaned the gunk in them though.

Just remove the bolts and pull it off. Wipe the grime off and reinstall. I just don't touch the clutch until I reinstall it.

But if you want to go the replacement route, I like the 30mm EVR. I put that on the Streetfighter and it made a world of a difference as far as clutch feel and fatigue in traffic.
 
I have already messed with it and pulled it apart, etc. and even had a dealer look at it and it is still leaking. It's actually leaking out of the outside edge (not from behind it like you'd expect) from the gap between the housing and the circular cover. Is that tightenable? It would be a wicked big torx/star bit if it is. :)

I may get the EVR and just be done with it.
 
I have already messed with it and pulled it apart, etc. and even had a dealer look at it and it is still leaking. It's actually leaking out of the outside edge (not from behind it like you'd expect) from the gap between the housing and the circular cover. Is that tightenable? It would be a wicked big torx/star bit if it is. :)

I may get the EVR and just be done with it.

That sucks. I would just head over to Duc Pond :eek: and get the EVR or whatever they have in stock. Anything else would be better!
 
Yeah, I'll bug Gunny/Belli or Motowheels and see what people are running these days and pick one up.
 
Did it make a difference? Were you having issues and having to bleed your clutch?

It does make a difference, has a lighter more precise feel to it. A little hard to explain. Had a problem early on with the clutch, bled the line and that fixed it. Not sure what that was about. The question really is... Did I need to change it? Of course not! :D
 
I'm doing the CNC Clutch Slave Cylinder 28mm from Gunny @ Bellissimoto.
I like the bling effect:D lol
 
Oberon is the most reliable slave cylinder. We never have any problems with them.

-M
 

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top