Tie Downs w Baxley Chock

10pm would be great. Both Putnam and NCM aren’t open that late.

Having your only track be COTA would be a good problem to have!

I highly recommend securing the front EVEN IF you’re using a Pitbull TRS. S____ happens so two points of contact are better than one.

I like these straps and tie downs for the front. I use the triple tree as the point of contact.

BP PanigaleV4S said:

No, but I was considering this for the same reason. It may be easier to get the bike locked into the Pitbull then install the front chock to hold the front wheel since you'll likely need to turn the bars a bit to get it locked in.

https://www.amazon.com/Extreme-Max-5001-5763-Motorcycle-Chock-5-5/dp/B01NB1WA6S/ref=sr_1_9?crid=1QC3DDQ0K3RKQ&dib=eyJ2IjoiMSJ9.RZW3vk6nLQekbkDxV9wdAA10ql-InFWyj_eO6NShwpdrAhdRD2G1ZfOTe0iPW2xIoG9DXai11xZFioB3as5rU9b-bI-AtJhXbxa6kz8avVcGx73y4759po8RzBMWJNpB6tFU_RO2Bfg776no000DEpKXs9V2At6HiJ4iZ0iqO40C6hfCWT9EoPkPUk2HWb3Bu8e27LfJ73ke3Cackh5BPEowbJnPSkECY7HZ678hX1EdDhGRNusfPX5cSq3E1q07Nf3UfWmct2axi2zcSRJfrND2N08BQd0-YtjCw6Rz51rpJdTxDNJdNBbDmzum1vwpS6yE7FmIqtG50Nn44LxJHplCq-WsIKxFXoOXvsz0_k_64PyJB-qvp-ZhnG-KIyvrP8yRGzBEbLk4BaOeK_RTm_2LIEvgY-sy8QzlbA7nBCYUutMIilIx60LwCSa_UT9x.J4xwPEDE9d4DPjutHRtbLtwDdkjKK1RMKG6nRsOY9Ps&dib_tag=se&keywords=motorcycle+wheel+chock&qid=1736450629&sprefix=motorcycle+wheel+chock,aps,92&sr=8-9

Click to expand...

I had wheel hoops similar to these, but with without securing the front wheel it was possible for the rotors to hit the hoop. I took them out and been using soft ties off the lower triple with just enough tension (no load on suspension) to prevent the wheel from flopping. Thought maybe those wheel straps from Amazon might quicker/easier to install. Especially when both bikes are in the 6'x10' trailer. For $15 apiece I might just give them a try. Probably one of the cheapest trailering accessories I'll buy.
Thanks all!

BP PanigaleV4S said:

Has anyone tied down a bike as the Baxley instructions show? How did it go?

I have a new trailer on the way and am sorting out tie downs and all that nonsense.

I have a Pitbull TRS, and am considering adding another. There’s a few reasons I’m considering using the Baxley with its bolt down kit. Cost, universal style - works with all bikes, keeps both wheels stationary and can easily be repositioned in the trailer depending on how many bikes I’m hauling for load distribution purposes.

Click to expand...

Works fine. Just need the chock to be mounted to the floor or pinned against a front wall. Pulling the bike forward into the chock compresses the front end. For extra safety, you can either tie the front rim to the chock upright so the front wheel can't back out of the chock or tie down the front end conventionally with a little added compression to keep the straps taught.

I use Condor e-track chocks instead of Baxley chocks for this. The e-track mounting makes it possible to have a lot more placement flexibility.

youpaiyou said:

I highly recommend securing the front EVEN IF you’re using a Pitbull TRS. S____ happens so two points of contact are better than one.

Click to expand...

The pics show why this is not a good way to mount a TRS on the trailer. The TRS can be mounted so the frame goes in front of the rear tire as opposed to behind the tire. Not as convenient to load/unload a bike with the TRS setup this way but the mount torques the trailer frame, rather than the folding hinged tail.

I would not tow a bike on a trailer with the TRS mounted the way it is mounted in your pictures.

Red999 said:

Has anyone used this on the front wheel while using the Pitbull TRS. I'm looking to keep the front wheel/handlebars from flopping around inside a tight trailer. Looks like it would be easier than running straps from the forks.
TIA!

Click to expand...

I have run Pitbull TRS for over 10 years in my 7’x14’ trailer, which is tightly packed with 4 bikes with Bursig stands strapped to them, a rollaway and all the other crap needed for track day weekends and long cross country track day vacations. I usually bring 4 sport bikes but have also had 5, and sometimes I bring my Multistrada and/or my friends R1300GS mixed in with the other bikes. I’ve probably done 200 plus trips packed this way.
I don’t tie down the front, and it has never been a problem. I think the front stays put because the TRS is locked into the rear axle and prevents the bike from moving side to side Also, I think that having the suspension free to operate absorbs shocks and vibration that wouldn’t be mitigated when using tiedowns and pretensioning the bike's suspension. That is the beauty of the Pitbull system.
The pic posted in this thread shows a failure of a folding trailer, and I don’t know if it is engineered to handle the load on that section of the trailer. I suppose the pic is proof that it is not. I have a 3/4” plywood floor on my ramp door trailer and it is holding up fine.
If you have a standard trailer with proper decking you don’t need to tie down the front.

Ray916MN said:

The pics show why this is not a good way to mount a TRS on the trailer. The TRS can be mounted so the frame goes in front of the rear tire as opposed to behind the tire. Not as convenient to load/unload a bike with the TRS setup this way but the mount torques the trailer frame, rather than the folding hinged tail.

I would not tow a bike on a trailer with the TRS mounted the way it is mounted in your pictures.

Click to expand...

I have had it mounted both directions. I agree with you that the TRS and Kendon trailers only work if the TRS is in front of the rear wheel. I want to emphasize your comment though about how inconvenient that method is. It’s extremely inconvenient. In fact, it’s so inconvenient that it’s almost not worth it.