brake

I replaced the brake pads on my panigale v2 stock brembo brake calipers. There's no issue on the right side because of the direction of torquing, but when I try to torque the left side to 45nm of torque, the reflector rotates up with the bolt and won't hold in place. I've tried clamps and zip...

Hi, Today I'm selling some gear and parts that have been sitting in a box in my garage for some time. Below are the items and my requested prices. All prices are OBO and do not include shipping or PayPal fees. Feel free to PM with an offer and give your location for shipping estimates. Local is...

*sold*: Rizoma RRC Brake and Clutch levers https://www.ebay.com/itm/274088227695 i did a hydraulic clutch conversion on my 2017 SP, so the clutch side doesn't fit any more. nice levers. as noted in the ebay listing, this combo seems to fit just the SP

Maybe I'm just terrible at searching the internet, but I wanted to verify which pads would fit the stylema calipers before ordering any. I assume any pad that fits an M50 would work, but would like to know for sure before dropping cash. Dealers have been no help, the stock pads do not have...

675 CAD 19x20 BILLET cnc radial brembo, i will ship the lever that folds "not oem brembo" i also have a matching brake billet cnc 19x20 but will only take offers on matching set https://drive.google.com/open?id=12lF-ddOIbCvllbtkZHTkhCaD2OCvxLyU

Which do you recomend and were te get them For best performance on track and street

Hey guys, I have a base 2015 1299. Right now I have Ferodo front and rear brake pads. My 1299 is mostly a commuter bike to work when the weather and temps in NYC/Long Island dont go below 40 degrees. And I alternate between my S1000R, S1000RR and Harley. But I do track the 1299 at least...

I installed a RapidBike tuner on my 2012 Hyper 1100 Sp. I as riding and noticed the brake light and turn signals aren't working. I checked the bulbs and they all work. The headlight (high and low beams) work and the rear running light works. The brake light doesn't work with front or rear...

Those of you that adjusted your levers. How did you get the pins out of the bars? All advice appreciated

Hi everyone guys, I bought the ducati performance rearset kit and I noticed that maybe I'm missing some insert to fix the beake pin to the footpeg, as you can see from the image. Can anyone tell me what piece it takes to avoid this game? From original instruction i don't understand because...

I have searched everywhere for some more insight on my issue. what I have. 2013 Ducati 1199 s abs with about 6k miles on it. Just had it shipped over to Hawaii and when I uncrated it and drove it home I had no issues with the rear brake, not releasing after being pressed. Also, I rode it...

just like the header says. looking for brake lever for 1199. pm me

about to take my bike in for the first service. Its an 18 without any of the recalls done yet. Do you guys think I should have the brake fluid swapped out while im there? It seeems incredibily dark for 600 miles.

Fellow racers, did anyone install a thumb rear brake on a V4? Does anyone make a kit? I really want to use rear brake to take advantage of extra braking capacity that comes with it, and slide by brake electronics, but I find it very awkward to be pressing down with the right foot than my ass...

Sorry to ask Trying to understand the settings What I want to accomplish is: While braking and downshift, I want the rear tire to brake the most posible, to help slow the bike down What is the best setting for this? ENGINE BRAKE 1 ENGINE BRAKE 2 Or 3? Or am I...

Sold

Hey guys, Anyone notice their front brakes on their 899/959 being soft/mushy. I have to pull the front brake lever all the way down just for brakes to bite. It can be a very scary feeling, especially when riding fast. I saw a thread on the 899 Forum...

Hello! this may be a rookie question but I’d rather ask and find out than do it and figure out that it doesn’t work, then redo things. I’m looking to change out banjo bolts at the clutch lever and front brake lever, they differ from each other in design. I have found replacement banjo...

Haven't ridden in a while (1month) and my front brake are squeaking under semi hard pressure. anyone else have this issue? brake plate has no rust or anything. maybe something that will go away after a few rides?

Hi, I've just bought a 2018 1200 R. I thought the rear brake pedal sits too high, however adjusting it lower results in it hitting the exhaust. Has anyone had the same issue and had luck in finding an alternate pedal, without having to purchase rearsets? Thanks in advance