sensor

I outfitted my bike this past weekend with a Rapid Bike Evo module that I picked up from shift tech after speaking to Yaman at Cycle pro. I am confident with my mechanical aptitude and sheer determination--with that being said--I never claimed to be a mechanic, I know just about enough to make...

The little pin has retracted into its housing and I cant see a way of freeing it. Any thoughts ? Looks like my return nut that hits the sensor didnt allow enough space and has pushed the pin into the housing too far.

Anyone else had or have this issue. The bike had a front end bump a few months ago, its not been ridden since but I really cant see any physical defects with either front or rear sensor or wires. I'm kind of hoping that a decent run will recalibrate it. Does anyone know if the speedo pick up...

I was looking to put some Ti bolts on the front discs. Someone told as they are not magnetic (no iron in Ti) that it may affect the front sensor wheel. Has anyone experienced this. Not really looking for guesses, prefer someone that has actually changed to Ti and whether they found any...

Checking bike over, for tomorrow nights track night, first on 1199S. Turned on ignition to change to lap timer and noticed no Neutral Green Light or N, but bike was in neutral. Will only start with side stand up, so electronics think bike is in gear. I thought bike was running a bit rough...

Hello! I have a small oïl leak coming from a brass sensor on the aft right side of the engine under the subframe I would like to know what type of sensor is this and if i could unscrew it and seal it

I am wondering whether the new Bosch lean-angle sensor could be connected to the "normal" Panigale CAN bus. Does anybody know whether it would be recognised by the DDA+ stick? Bosch Media Service

What do I do with the second sensor? It doesn't seem to be referenced in the install guide.

I've purchased some stainless steel brake disc mounting bolts to replace the OEM items. One thing that concerns me is if this will affect the front and rear wheel hall effect speed sensors, since on previous Ducatis I have owned, these sensors used the disc bolts to trigger the signal and...

Hi all dear Family of Ducati 1199! I have a bit problem with my Ducati 1199 Panigale 2012 on (Sensor Posizione Cambio / Gearbox Position Sensor). Who you guys can help me this problem or need me to change to order that sensor? I have attachment bellow to let you guy know my problem: I need...

Upon Key-on my dash shows a flashing 'N' indicator and a flashing 'C' in the gear display. Only if I pull the clutch and lift the stand will the bike start. Once ridden the gear display shows '-' and the neutral indicator remains lit. The owner manual says all this means the gear 'teach-in' has...

I have just finished installing 2 LC-1 wide band O2 sensors to compliment my TuneBoy setup. Wideband sensors will be necessary for many tuning options not just the TuneBoy. There was a bit more to it than I had hoped so I'll leave some bread crumbs here for anyone that wants to follow down the...

No one seems to want to chime in on other threads, so I'm going to blast it out. Is the speed sensor located at the wheel or gearbox? Thank you!

Hey guys, I just lubed the chain on the stand (like normal) and the bike came up with Speed Sensor warning. I rode around a little and it didn't go out. I assumed it was something to do with the TCS so did a search on here and came close (Burnout thread) which says it will turn off after...

Hi, Has anyone else experienced a speedsenor fault after doing a burn out? It reset after the bike was shutdown for 5 minutes. Interestingly I call the Ducati Assist hotline (Australia) only to be on hold for 58 minutes.

Installed the DP adjustable levers, they are great. However I am having problems getting the brake light to come off. No matter how I adjust the brake lever or the tiny plastic tube that makes contact with the brake light sensor the brake lights have a tendency to stay on when the lever is...

For the past several thousand miles when my S gets hot the gear indicator display flashes between 1st and N when in N. If I put the side-stand down the bike will eventually stall, thinking that it's in 1st (side-stand cutout). Anyone else experience this?

Hey guys, Have anyone have there side stand sensor fail on them? Was out for a cruise coastal ride today, when i was travelling about 50km/hr and my bike just cut out, look down at the dash and saw the side stand icon/light on so pull over. After letting it sit for afew minutes and turning it...

Had my first clubrace this past weekend and was running really late race prepping. I unplugged and unbolt the kickstand, and left it at home. I then tried to bypass the sensor only to find out it's a hall effect which needs 1.2V, down from a supply of 5V to give the kickstand up signal. Without...

Hey guys, I just finish ceramic coating head guard and wraping the headers. So now everything is back on, but when I turn the bike on I get a warning light with an exclamation the says "Speed Sensor" Where can I start? (I check all the cable by the computer) Where is the sensor? How do I...