2025 Ducati V2

Ducati Forum

Help Support Ducati Forum:

Thanks Dan for the pictures! The swingarm looks much better in these. I'm falling in love with the bike. Propably start annoying Bobbie soon...
 
Looks like the first ride reviews have gone live, and either Ducati marketing was handing out amazing gift bags and tons of espresso or the enthusiastic reactions are actually genuine.

Can’t wait for mine to roll in, no clue when yet, though supposedly 2nd V2S coming in through my dealer. It will be interesting to see if the Time Attack package has the same graphics they were showing off in Spain.

https://www.visordown.com/reviews/ducati-panigale-v2-s-2025-review-new-v2-tested-track
 
I very nearly bought one...however, I could not get my head around the 120hp. I would not have minded a lower power point say down 15hp...but dropping 35hp was just too much. 17kg (or 13kg for the s) less and 140hp would have been my sweet spot to throw money down.

I ended up with the new v4s for a .... load more money and too much power for me. 🤷‍♂️

Maybe in 2-3 years they'll drop a little more weight and increase the power to over 130?
 
I hear ya, hanging on to my current V4 and this will be an addition to the family. A little road duty and smaller track bike.

I would wager a small sum that we see an R version of this with their eyes on the SuperSport class (which is currently using the previous V2 for a couple of years). Lighten the internals for a few more RPMs and throw on a hefty profit margin, but it stays in line with the model naming scheme.
 
same here, I got one on order as well... DNB says mid March ETA.. i dig the "v4r" style as well.. cant wait to see and feel the thing in person!
 
I don't understand how Ducati could get a claimed 148hp out of a 898cc 899 Panigale motor, but only 120hp from this 890cc motor with adjustable cam timing. I sure hope it's because of the tune and they're limiting the top end like the Japanese do.
 
Different cam timing, different valve train design, different compression ratio, different porting for higher rpm power vs low rpm torque, and (need I say it) Desmo valve train for a more aggressive opening and CLOSING valve movement that increases power in the areas necessary without danger of floating the valves. The 899 was basically a smaller bore 1199, and the 1199 made 195 hP and 90+ ft-lbs of torque. 3/4 of 195 is right at 145 hP, which works with the 899's rating.

If you put the 899 heads/cams on the new V-2, you'd gain power but lose low-rpm tractability. hP is an rpm related power number. Torque is not. Look at the power curves and you'll see the difference.
 
Sheikh said:
Different cam timing, different valve train design, different compression ratio, different porting for higher rpm power vs low rpm torque, and (need I say it) Desmo valve train for a more aggressive opening and CLOSING valve movement that increases power in the areas necessary without danger of floating the valves. The 899 was basically a smaller bore 1199, and the 1199 made 195 hP and 90+ ft-lbs of torque. 3/4 of 195 is right at 145 hP, which works with the 899's rating.

If you put the 899 heads/cams on the new V-2, you'd gain power but lose low-rpm tractability. hP is an rpm related power number. Torque is not. Look at the power curves and you'll see the difference.
Click to expand...
Just so were on the same page, the 899 was a small bore & de-stroked 1199, the 959 had the same bore as the 899 and the same stroke as the 1199/1299. I'd say the 959/V2 is the small bore 1199. However the 899 makes more torque than the 2025 V2 too, there both rated at the same RPM 10,750. The curve is important but damn, for racing big numbers are even more important.
 
In the supersport class wasn't the V2 limited? I think the new V2 will allow the bike to compete in a race series without being limited. It's down on power but also weight.
 
BP PanigaleV4S said:
In the supersport class wasn't the V2 limited? I think the new V2 will allow the bike to compete in a race series without being limited. It's down on power but also weight.
Click to expand...
Yeah, you are absolutely right about that. The old V2 is neutered for the 600 class because it's a 750 class bike. It's exponentially more fun riding a slow bike fast than it is a fast bike slow, so I hope this V2 is a success.
 
Forewarned said:
Just so were on the same page, the 899 was a small bore & de-stroked 1199, the 959 had the same bore as the 899 and the same stroke as the 1199/1299. I'd say the 959/V2 is the small bore 1199. However the 899 makes more torque than the 2025 V2 too, there both rated at the same RPM 10,750. The curve is important but damn, for racing big numbers are even more important.
Click to expand...
Basically, yes. Some valve clearance changes for the 899/959, and rebalancing the crank for the 1299's heavier pistons and clearances on the crank for the skirts, but otherwise the same engines with slightly different components. Kind of like a Small Block Chevy 307/305 and 350.
 

Similar threads

duc
2025 Ducati Panigale V2 Superquadro Final Edition - Pictures & Information
Replies
5
Views
1K
TakoDivah
T
T
ABS Delete on the V2. Anyone done it?
Replies
1
Views
196
Kees Pater
K
C
Aluminum Subframe Options
Replies
3
Views
213
Bruce Wayne
B
chaos343
  • Poll
TUNE OPTIONS FOR PANIGALE V2
Replies
6
Views
1K
NYCV4S
NYCV4S
B
My v2
Replies
8
Views
628
BTP42
BTP42

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top