899 Bellypan and stock exhaust

Ducati Forum

Help Support Ducati Forum:

hfrohar

hfrohar

Joined
Jun 18, 2016
Messages
6
Location
Sydney, AU
Hi guys,

There are a few threads regarding bellypan but I couldn't find anything 100% clear to answer my question.

I'd like to know if you can fit bellypan with stock exhaust on the 899? (can't afford to spend 2k for silencer just to fit bellypan at this point)
If yes, what bellypan have you installed? did you have to make any changes to fit it?
Would be absolutely amazing if you have done this and you have photos to share so that I know what needs to be done and how it looks like after the install?
I'm a little bit confused as how it will fit with stock exhaust and standard fairing!

Thanks a lot
 
99.9% of readily available belly pans don't fit with the stock exhaust.

here in the US, we use aluminum turkey pans from the supermarket to fit them between engine and stock exhaust. this is legal as per the rules for club racing.
 
Phl said:
99.9% of readily available belly pans don't fit with the stock exhaust.

here in the US, we use aluminum turkey pans from the supermarket to fit them between engine and stock exhaust. this is legal as per the rules for club racing.
Click to expand...

"We" :confused:


More like "Some people" :p


I used it as an excuse to get a full akra system. lol
 
That's a great idea, do you have any pictures of what you have done?
 
Another option is to buy any belly pan that's available or cheapest and modify the back part as that is where the OEM exhaust gets in a way. In my poorer days I did that with armor bodies belly pan. I cut out the parts that got in the way. Than molded a reasonable shape using turkey stuff SOME people mentioned here :) . Tested the shape and then adde fiberglass cloth and epoxy on the outside of turkey stuff and it was solid. Make sure to use resin that has good thermal properties as it runs hot down there :) I don't have pictures as I did that in 2013 and not proud of the looks , but it worked and race inspection was passed :)


Sent from my iPhone using Tapatalk
 
royal said:
That's a great idea, do you have any pictures of what you have done?
Click to expand...



Many race clubs don't allow just the tin foil stuff. It has to be solid and fixed mounted bla bla.


Sent from my iPhone using Tapatalk
 
Thanks a lot guys.
Got the idea. Tin foil, fiberglass cloth, epoxy and modified belly pan it will be :)

b2835e69631f2d0253831d7988ad6268.jpg
 
Last edited:
I have to wonder - how'd this turn out? I'm building a 959 so I'll have a similar custom fab project.
 
I ended up upgrading to Termi slipon and buy an oil tray from Ilmberger Carbon which has amazing quality.


Sent from my iPhone using Tapatalk
 

Similar threads

jjj0923
Termignoni High Pipe Full (nearly) install - observations
Replies
4
Views
1K
jjj0923
jjj0923
J
Panigale V2 Pops and backfires with Arrow Exhaust Slip
Replies
8
Views
395
Bad Alice
B
D
Thinking Of Switching from 848 to V2
2
Replies
25
Views
988
RocketSFV4
R
J
Spark Exhaust GDU8832 install question
Replies
7
Views
920
SSXRNR
S
WCR
For Sale 2020 Ducati Panigale V4R
2
Replies
21
Views
886
ArtikonerV2
ArtikonerV2

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top