Can anyone assist in identifying some hoses on 2016 1299s?

Hello fellow Ducati owners! I am in need of some assistance in reassembling a 2016 1299s. I got the bike in a collection of bins so I did not take it apart ... bolts missing, unidentified parts, etc, etc ... even found some V4S parts in the bin, which was NOT helpful!!

Anyhow my current issue is that I have a couple of mystery hoses that I simply cannot figure out. The first is the hose (coolant, I think?!?) that goes in to the oil heat exchanger on the right hand side of the bike. it then seems to go through between the cylinders to the other side, and I have no clue as to where it is supposed to be attached!



Secondly, possibly related, I found this nipple on the underside of the top tray:



As far as I can tell from the manuals, this should be a drain going down to the bottom of the bike, into the fan shroud with an odd hose with a pinched end. I have the hose and it appears approximately the correct length, but the interior diameter seems to be too big for the nipple on the top tray, and I also am unsure of how it should be routed down the left side of the bike.

I know some of you guys will have had these bikes apart a million times, and probably know exactly where everything should go, but I've never actually seen a "naked" Panigale before receiving the bins of parts ... so I'm really struggling to figure some of this stuff out! Any assistance would be greatly appreciated!!

Thanks in advance!

In the second picture, you are correct it goes from that nipple on the air box to the bottom of the bike. At the airbox there is a little clamp that is missing that holds it in place. That clamp was garbage anyway so just get you a little warm gear clamp and tighten it there.

I’ll have to check on the first one that is water though from the radiator in that hose

Jag

OK, so to clarify - the drain hose goes from the nipple to the bottom of the bike, correct?

And I figured the hose in the first picture was coolant - but can't for the life of me figure out where it connects, as I can't find anything without a hose already on it!

Your assistance is greatly appreciated!

Tony

awbullock said:

OK, so to clarify - the drain hose goes from the nipple to the bottom of the bike, correct?

And I figured the hose in the first picture was coolant - but can't for the life of me figure out where it connects, as I can't find anything without a hose already on it!

Your assistance is greatly appreciated!

Tony

Click to expand...

Correct

The coolant hose goes to the nipple on the radiator under the cap. The hose runs along the right side of the frame and plastic returning coolant from the oil cooler to the radiator to cool back down.