Exhaust servo connector cap when removing servo motor

tteitei · May 18, 2017

Hi Guys,

Needs some help to source a 'cap' which protects the connection from the ECU to the exhaust servo motor. This is normally supplied when you buy a termi slip on kit or a full kit but I got some slip-ons second hand and this little thing is missing. The cap can be seen in the attached photo.

TIA

Yoshi

Twistedracer · May 18, 2017

It's in the racing electrical connectors kit listed in this thread. Should be in the nose kit.

http://ducati1299.com/mechanical-technical/20943-96580011a-racing-electrical-connector-kit-2.html

Halo2 · May 18, 2017

I just used heat shrink on mine, squashed it down and folded it over.

Twistedracer · May 21, 2017

tteitei i just opened my kit, the plug isn't in there.

Halo2 · May 22, 2017

Also does anyone know where to get a replacement connector for the servo motor main harness side.

Its the one left behind when you unplug the servo motor.

Sutki · May 22, 2017

You don't need it, thats why is not coming with "racing
kit. ( no error code, just unplugged it)

Twistedracer · May 22, 2017

Sutki said:
You don't need it, thats why is not coming with "racing
kit. ( no error code, just unplugged it)

Yup no error codes. I still wouldn't mind having the plug though. I looked over the instructions for the Akra kit that came with the Anni and no mention of it. Also nothing in the Akra part number breakdown.

tteitei · May 22, 2017

Yeah, I agree with Twisted. I just want to cap the connector to prevent water getting in. I did find this website which sells Sumitomo HX 040 plugs. Waiting to get confirmation that the plug is correct;
Sumitomo HX .040 - .090 Connector and Terminals

Sutki · May 22, 2017

tteitei said:
Yeah, I agree with Twisted. I just want to cap the connector to prevent water getting in. I did find this website which sells Sumitomo HX 040 plugs. Waiting to get confirmation that the plug is correct;
Sumitomo HX .040 - .090 Connector and Terminals

Great, gonna order also if it working. Please, let me know.

Twistedracer · May 22, 2017

That looks to be the one. Here's the pic of the one on my Anni.

tteitei · May 23, 2017

I've gone ahead and purchased the connector even though I didn't get a reply from the shop to confirm. I did however do a search for Honda/Acura Air/Fuel Ratio - AFR Sensor Connector (mentioned on the description) on Google and found photos which are an almost exact match so what the hell.

Twistedracer · May 23, 2017

tteitei said:
I've gone ahead and purchased the connector even though I didn't get a reply from the shop to confirm. I did however do a search for Honda/Acura Air/Fuel Ratio - AFR Sensor Connector (mentioned on the description) on Google and found photos which are an almost exact match so what the hell.

ThAt sure looks like it. Let us know.

tteitei · May 23, 2017

Got a reply from the owner of the cycleterminal.com. He confirmed that the photos I posted to him are the connector Sumitomo HV040-06 male. Phew!

Twistedracer · May 23, 2017

tteitei said:
Got a reply from the owner of the cycleterminal.com. He confirmed that the photos I posted to him are the connector Sumitomo HV040-06 male. Phew!

Alright! Great news! I'll have to order one. I prefer to have it plugged also.

Twistedracer · May 24, 2017

tteitei said:
Got a reply from the owner of the cycleterminal.com. He confirmed that the photos I posted to him are the connector Sumitomo HV040-06 male. Phew!

Don't forget to order the dummy plugs at the bottom of the page to seal it.

tteitei · May 24, 2017

Twistedracer said:
Don't forget to order the dummy plugs at the bottom of the page to seal it.

Doh..

Sent from my iPhone using Tapatalk

Halo2 · Jun 30, 2017

tteitei said:
Sumitomo HX .040 - .090 Connector and Terminals

From that website which one is the connector left behind when you unplug the flapper motor mine is damaged?.

6 pin HV .040 Female Connector - with Terminals and seals
Terminals Fit wire size .5 - 1.3 mm (18-22 AWG) Japan
6189-4070

Correct????

tteitei · Jul 1, 2017

Halo2 said:
From that website which one is the connector left behind when you unplug the flapper motor mine is damaged?.

6 pin HV .040 Female Connector - with Terminals and seals
Terminals Fit wire size .5 - 1.3 mm (18-22 AWG) Japan
6189-4070

Correct????

Yes, that should be the femaie connector which is part of the wiring loom, the male is the connector from the exhaust valve motor.

rrgermanlv · Jul 2, 2017

No error codes that you can see on the dash.. but there will be an internal error code. Doesn't affect the performance tho... Only way to get rid of it is flashing the ECU to disable the servo. (I dont know if rapidbike or any other add on device can do that as well or just a flash)

topolino · Jul 2, 2017

tteitei said:
Yeah, I agree with Twisted. I just want to cap the connector to prevent water getting in. I did find this website which sells Sumitomo HX 040 plugs. Waiting to get confirmation that the plug is correct;
Sumitomo HX .040 - .090 Connector and Terminals

Wont you need the blanking seals as opposed to the normal wire seals for this connector, else you will have a cap with six holes in it.

Exhaust servo connector cap when removing servo motor

Help Support Ducati Forum:

tteitei

Attachments

Twistedracer

Halo2

Twistedracer

Halo2

Sutki

Twistedracer

tteitei

Attachments

Sutki

Twistedracer

tteitei

Attachments

Twistedracer

tteitei

Twistedracer

Twistedracer

tteitei

Halo2

tteitei

rrgermanlv

topolino

Similar threads

Register CTA

Recent Discussions

Recent Discussions