Help Please DTC Code p1006

Ducati Forum

Help Support Ducati Forum:

Joined
Mar 22, 2019
Messages
88
Location
New York
Anyone familiar with this Engine code? P1006 Evap/EVR.

Anyone familiar with Vandemon Exhaust. There was this black eliminator plug with a female end connection that came in the exhaust hardware and i did not find a home to during installation. I'm hoping that's my issue why I'm receiving a engine code p1006. As this code only came up after exhaust installation.

Thanks for your inputs in advance!
Bryan
 
Yeah like Sickduc mentioned if you removed the old exhaust the servo motor lead plug connector is under the battery on the starter relay box. That plug that came with your exhaust should plug into that connector.
 
Yes I believe it is I’m hearing this more and more . Unfortunately the servo eliminator provided doesn’t have the right female end on it , I’m asking bren tunning to disable through the flash , but we will see if they can smh
 
If it's unplugged it will


Sent from my iPhone using Tapatalk

Only an internal code is registered. No error code should be displayed on the dash. I have removed the harness on multiple 1299s include my R and have never seen a code thrown. It does register on the DDS though.
 
No nothing else , it is completely disconnected , my servo eliminator sent was the wrong one to connect to solve the void , hoping this is it as nothing else was done as it was a fairly simple job
 
Back
Top