- Joined
- Dec 24, 2019
- Messages
- 527
- Location
- San Jose, CA
Very nice and tasteful choice as usual HKMP7, I never notice that "pocket" until your picture above 
HKMP7's V4S Journal
- Thread starter HKMP7
- Start date
Help Support Ducati Forum:
- Joined
- Aug 10, 2016
- Messages
- 730
- Location
- Connecticut
Any experience with the full six tank cover ? Evo is out of stock on the cover right now.Whenever I get a new bike I want try to get it protected first so I can ride it with no worries. So while I was getting the paint up to par this piece came in.
With the bottom of the gas tank being exposed that sticky Pirelli SC would destroy the paint. Now I don't have to worry
V4EVO tank cover.
- Joined
- Feb 23, 2018
- Messages
- 453
- Location
- AZ
I don't personally but I hear good things about their fitment.
- Joined
- Feb 23, 2018
- Messages
- 453
- Location
- AZ
I try to be careful and torque to spec and Ive never had the finish degrade.
These have be on my 636 for 5 years plus with multiple tire changes and general maintenance.
Last edited:
- Joined
- Feb 23, 2018
- Messages
- 453
- Location
- AZ
DP Carbon rear fender
I went with this style because you can use it with the factory exhaust as well as aftermarket.
Coated with Gtechniq CSL and Exo as a top coat.
Proti hardware
The fender matches the carbon tail pretty well. That red stitching is the business.
I went with this style because you can use it with the factory exhaust as well as aftermarket.
Coated with Gtechniq CSL and Exo as a top coat.
Proti hardware
The fender matches the carbon tail pretty well. That red stitching is the business.
- Joined
- Feb 23, 2018
- Messages
- 453
- Location
- AZ
Super excited
I was able to hear one in person and it has a lot of bark. The online clips don’t do it justice.
- Joined
- Feb 23, 2018
- Messages
- 453
- Location
- AZ
Exhaust accessories prep
I got the matte carbon coated with Dr Beasley's
Proti Bolts for the heat shields
Treated the cans with a high temp wax that will help keep them clean and free of chain sling.
Akra Exhaust lowers
Wanted to protect the lowers from melting so I added some Gold heat protection
The silver stuff is what it comes with from Ducati.
I got the matte carbon coated with Dr Beasley's
Proti Bolts for the heat shields
Treated the cans with a high temp wax that will help keep them clean and free of chain sling.
Akra Exhaust lowers
Wanted to protect the lowers from melting so I added some Gold heat protection
The silver stuff is what it comes with from Ducati.
- Joined
- Dec 1, 2019
- Messages
- 2,759
- Location
- Mar A Lago
that’s a step above. Ducati had to redesign the lower fairing section on the early 99’s to keep them from melting.
What do u see down the Akra end can? Is it straight through flow or is there some trickery in there
- Joined
- Feb 23, 2018
- Messages
- 453
- Location
- AZ
There were baffles but I removed them. I wear earplugs when I ride and I could care less about my neighbors. ha ha
- Joined
- Mar 31, 2020
- Messages
- 201
- Location
- Europe
Wanted to protect the lowers from melting so I added some Gold heat protection
The silver stuff is what it comes with from Ducati.
Details on the gold film? Precut, price, link? Thanks.
- Joined
- Dec 1, 2019
- Messages
- 2,759
- Location
- Mar A Lago
gotta make friends with a nasa engineer
- Joined
- Feb 23, 2018
- Messages
- 453
- Location
- AZ
It is not precut comes just like in the picture I posted. I measure and use xacto knife to cut to spec. I buy it local from these guys.
They make some of the best exhaust manifolds around. The film withstands up to 675 degrees.
Gold Heat Reflecting Film Self Adhesive - 12" x 24" • Full Race
Gold Heat Reflecting Film (Self Adhesive) Full-Race's Gold Heat Reflective Film is capable of reflecting 78% of all radiant heat with continuous operating
www.full-race.com
- Joined
- Jul 3, 2019
- Messages
- 228
- Location
- 626
I would put Zircoflex up against any other cheaper gold film and it would reflect heat so much better. But that's such a lower region that I wouldn't worry too much about it compared to under the seat of the bike.
- Joined
- Feb 23, 2018
- Messages
- 453
- Location
- AZ
Ive seen stuff like that on turbo applications.
Nice
Torrific have you done your seat? I don’t think my seat gets that hot.
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
