Just got the 1299 version of NRC tail tidy/LED indicators

Ducati Forum

Help Support Ducati Forum:

I got the mirror plugs too. I would post pics but I can't seem to get it to work. Highly recommend them as well.
 
Updated pic...

p1187424879-5.jpg
 
Question, the lower 2 holes that the tag bracket mounts to...did your kit come with the 6mm bolts?


Or spacers or anything?
 
Last edited:
Grayson said:
Question, the lower 2 holes that the tag bracket mounts to...did your kit come with the 6mm bolts?


Or spacers or anything?
Click to expand...
They had to send me a set of replacement bolts, because the one that bolts through the metal body/plate wasn't long enough and the two bolts that bolt the license plate to the passenger peg holes were TOO long. The set that they sent me solved the problem and it fitted perfectly. And yes, I did get a couple of spacers with the bolts.

I think it looks amazing. I will take some pictures of my bike with the license plate bracket installed and post them.
 
Ok, I am going to have to call them. I didnt get the right hardware either. I had other M6Bolts but I would rather have the peg bolts with the spacers in there. The other bolts were a complete pain because they were too long and I didnt want to drive another 30 minutes back to Lowes.

Thanks again for your help.
 
My email to NRC:

Hi Justin,

Do you know if this shipped with the applicable bolts for the 1299/S? I am reading some things on forums about the plate bolts being too long and the body part bolts being too short.

Everything I've read said you guys have been awesome about sending the replacements, but just wanted to check to save a few bucks on shipping if need be.

Thanks for the super-fast service!!

Their reply:

Yes, we changed the hardware around and all kits now have everything needed!

Thanks!
 
JDBeretta said:
My email to NRC:

Hi Justin,

Do you know if this shipped with the applicable bolts for the 1299/S? I am reading some things on forums about the plate bolts being too long and the body part bolts being too short.

Everything I've read said you guys have been awesome about sending the replacements, but just wanted to check to save a few bucks on shipping if need be.

Thanks for the super-fast service!!

Their reply:

Yes, we changed the hardware around and all kits now have everything needed!

Thanks!
Click to expand...
Glad they managed to take my input and correct their parts list.

Good to know that they listen to their customers...

Cheers.
 
80shilling said:
Glad they managed to take my input and correct their parts list.



Good to know that they listen to their customers...



Cheers.
Click to expand...


No matter how big/small the operation, it's the little things like that (noticing an issue that quickly) that make you want to give them business.
 
He responds very quickly. My issues may can be answered here. I need pictures of the underside of the tag bracket mounting. I used the strap bolts M6x10 located in the tail section. (The ones that hold the leather passenger strap) to secure the tag bracket to the bike.

The passenger peg brackets bolts are M6x13 need sleeves or spacers or something to set flush to make the bracket tight. I may be wrong, however better instructions or a better mounting solution would be great.

The fender eliminator part is a great piece.
 
Grayson said:
He responds very quickly. My issues may can be answered here. I need pictures of the underside of the tag bracket mounting. I used the strap bolts M6x10 located in the tail section. (The ones that hold the leather passenger strap) to secure the tag bracket to the bike.

The passenger peg brackets bolts are M6x13 need sleeves or spacers or something to set flush to make the bracket tight. I may be wrong, however better instructions or a better mounting solution would be great.

The fender eliminator part is a great piece.
Click to expand...


If you haven't gotten any further by the time mine is here, I'll get you pics of the mount.
 
Grayson said:
He responds very quickly. My issues may can be answered here. I need pictures of the underside of the tag bracket mounting. I used the strap bolts M6x10 located in the tail section. (The ones that hold the leather passenger strap) to secure the tag bracket to the bike.

The passenger peg brackets bolts are M6x13 need sleeves or spacers or something to set flush to make the bracket tight. I may be wrong, however better instructions or a better mounting solution would be great.

The fender eliminator part is a great piece.
Click to expand...
With the correct length bolts, everything fits perfectly and there is no need for spacers, UNLESS you are running passenger pegs.
 
I have it mounted up, it works. However it's not the correct way. I have a mounting plate, tag bracket, 2 flat hex bolts and 2 locking nuts.

I will take pictures and upload shortly
 
I've talked to Justin again. I didn't have the 6mm bolts so I haven't heard back from him but that's where my confusion was. The quick responses and lack of hesitation make this a definite go-to company.
 
Grayson said:
I've talked to Justin again. I didn't have the 6mm bolts so I haven't heard back from him but that's where my confusion was. The quick responses and lack of hesitation make this a definite go-to company.
Click to expand...

Oh thank goodness I am not crazy. I count three bolts in my kit and there is no way that license plate bracket is making it on there with the heatshield and included parts.

I tend more towards 1's and 0's than bolts and nuts, but compared to the kit for my 1098 and RC51 I installed this one is a bear. Maybe mine was an early shipment (no instructions, short some bolts, and the long bolt is no way long enough), but I am not all that happy with this order.
 
oneguynick said:
Oh thank goodness I am not crazy. I count three bolts in my kit and there is no way that license plate bracket is making it on there with the heatshield and included parts.



I tend more towards 1's and 0's than bolts and nuts, but compared to the kit for my 1098 and RC51 I installed this one is a bear. Maybe mine was an early shipment (no instructions, short some bolts, and the long bolt is no way long enough), but I am not all that happy with this order.
Click to expand...


Contact Justin Vogel at NRC. Although it's a pain in the ass to wait and piss around, they are very accommodating and will send you proper stuff immediately (from what I've seen here and experienced with my purchase from them).
 
If I didn't read that post twice, in 2 different spots in this thread, I think I'm the crazy one.
 

Similar threads

C
Tail Tidy's - any minimalist recommendations?
Replies
14
Views
412
AV Mike
A
A
Futurismoto Tail Tidy
Replies
14
Views
2K
DesmoRR
D
J
No indicators / horn - Wiring headaches and help
Replies
1
Views
205
BP PanigaleV4S
BP PanigaleV4S
D
Thinking Of Switching from 848 to V2
2
Replies
25
Views
1K
RocketSFV4
R
Vicati
For Sale Panigale 1299s and Panigale 959 Full bolt ons
Replies
11
Views
786
Vicati
Vicati

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top