Modified Panigale Thread

Ducati Forum

Help Support Ducati Forum:

No Trellis said:
Red Dawn... What parts did you replace during the rebuild? Thx
Click to expand...

Motor was blueprinted. We had brand new stuff that was never fired replaced, but it is under Superstock rules. No major replacement of things, but he did some head work within rules and thinner head gaskets along with the blueprinting. TJ removed everything that was not needed also. Relocated the kill switch to where the key used to be. Toggle switch for ignition switch. Looking at some other things like map selection switch replacement. I like the CNC machined switches out there, but TJ will probably find a location inboard and away from the clip-ons. Which I would prefer.

Looking to Rexxer (Contact Dave at Redline) to get some custom mapping that hasn't really been done before. Dave and the boys are getting some cool stuff done for us and we are trying a few things. They've been awesome.

Of course, we have the typical race bolt-ons. The parts list is as follows:

Started with 2012 1199 STANDARD model...

-DP Race Seat
-DP Carbon Fiber Front Fender
-Armor Race Bodywork
-Woodcraft Rearsets
-Woodcraft Clip-ons
-Woodcraft Case Cover
-DP Folding Levers
-Full Termi system
-DP GPS unit
-DP Race Windscreen
-Ohlins TTX rear (Carr Moto)
-Ohlins 30mm Cartridges (Carr Moto)
-DP Gas Cap
-Race Air Filter (I cannot remember the brand, but has red aluminum cage if that helps know. They have a street and race version. We have the race of course)
-Speigler Brake Lines

Just haven't decided on color yet. Thinking WSBK style red and white, but am really fond of gloss black as the last few race bikes have had gloss black and I think it will make the lines stand out on the 1199. Plus, everyone does red which is really cool, but I want badass as well as beautiful. It's a great build and with someone like TJ doing it, I want him to be proud beyond the build.
 
Got the radiator mounted and TJ cleaned up the wiring to make it less like a tangled mess. It is amazing when sitting next to another 1199 with fairings off... It's this level of detail that I am so impressed by. He just cannot cut corners and I respect and appreciate that.

Note the beautiful job of safety wiring. I couldn't have done it better and I am VERY particular on my wiring. There isn't going to be a race org that finds something missing in terms of wired. TJ is so thorough that I will probably be seen at tech and just waved to go on by. :D


894819_512599005442439_1517795527_o_zps9dd0fe45.jpg


892859_512599042109102_1767863055_o_zps43a1d599.jpg
 
TransNone13 said:
To each their own. That's why they're stickers, easily removed if I feel like it.
Click to expand...

+1 - if I saw you coming with those stickers plus the "FEAR THIS" stickers and the naked lady silhouettes you have on the other side of the bike I'd prob run the other direction. Especially when you dismounted and removed your mohawk helmet and your jacket and I saw your collection of tribal tats, sagging jeans, two sizes too small wifebeater t-shirt and blowout hairdo.
 
Red Dawn said:
Note the beautiful job of safety wiring. I couldn't have done it better and I am VERY particular on my wiring. There isn't going to be a race org that finds something missing in terms of wired. TJ is so thorough that I will probably be seen at tech and just waved to go on by. :D
Click to expand...

can you post some more detailed pics of the wiring?

many thanks!
 
Red Dawn said:
Motor was blueprinted. We had brand new stuff that was never fired replaced, but it is under Superstock rules. No major replacement of things, but he did some head work within rules and thinner head gaskets along with the blueprinting. TJ removed everything that was not needed also. Relocated the kill switch to where the key used to be. Toggle switch for ignition switch. Looking at some other things like map selection switch replacement. I like the CNC machined switches out there, but TJ will probably find a location inboard and away from the clip-ons. Which I would prefer.

Looking to Rexxer (Contact Dave at Redline) to get some custom mapping that hasn't really been done before. Dave and the boys are getting some cool stuff done for us and we are trying a few things. They've been awesome.

Of course, we have the typical race bolt-ons. The parts list is as follows:

Started with 2012 1199 STANDARD model...

-DP Race Seat
-DP Carbon Fiber Front Fender
-Armor Race Bodywork
-Woodcraft Rearsets
-Woodcraft Clip-ons
-Woodcraft Case Cover
-DP Folding Levers
-Full Termi system
-DP GPS unit
-DP Race Windscreen
-Ohlins TTX rear (Carr Moto)
-Ohlins 30mm Cartridges (Carr Moto)
-DP Gas Cap
-Race Air Filter (I cannot remember the brand, but has red aluminum cage if that helps know. They have a street and race version. We have the race of course)
-Speigler Brake Lines

Just haven't decided on color yet. Thinking WSBK style red and white, but am really fond of gloss black as the last few race bikes have had gloss black and I think it will make the lines stand out on the 1199. Plus, everyone does red which is really cool, but I want badass as well as beautiful. It's a great build and with someone like TJ doing it, I want him to be proud beyond the build.
Click to expand...

In the process of blueprinting, did some of the bluing spill on the engine, or is that your white balance screwed up? :) Did you have to make many changes after the blueprinting? And did you cc the heads? Or is that not important with only 2.
 
TransNone13 said:
I'll get better pictures in the AM:

Lightech Parts:

Mag Levers
GP Rearsets w/ CF Guards
Bar Ends
Mirror Block Offs
Fender Eliminator
Front Axle Slider
Brake/Clutch Res. Caps
Gas Cap

DP :

Race Seat
Rear Hugger
Key Cover
Shock Cover

Rascal Grafiks Tank Pad
Domino GP DD Grips
PUIG Light Smoke Race Screen
CNC 28mm Clutch Slave
DID 520 EVR3
AFAM QC Carrier
AFAM Steel Front Sprocket
AFAM Al 41T Sprocket
Michelin Power CUP Tires
Corse Res Socks lol
CD Shift Rod
CD Smog Plates
BMC Race Filter
Full Termi w/ CF Lower Infil (on the way)
COX radiator Guard
GB Racing Case Sliders
DC Outlet for GoPro/Cell

20130403_201926.jpg
Click to expand...

Thants not how you spell SEDUCTIVE! hahaha
 
Capt CF said:
+1 - if I saw you coming with those stickers plus the "FEAR THIS" stickers and the naked lady silhouettes you have on the other side of the bike I'd prob run the other direction. Especially when you dismounted and removed your mohawk helmet and your jacket and I saw your collection of tribal tats, sagging jeans, two sizes too small wifebeater t-shirt and blowout hairdo.
Click to expand...

+2 Trans you goon! :)
 
Capt CF said:
+1 - if I saw you coming with those stickers plus the "FEAR THIS" stickers and the naked lady silhouettes you have on the other side of the bike I'd prob run the other direction. Especially when you dismounted and removed your mohawk helmet and your jacket and I saw your collection of tribal tats, sagging jeans, two sizes too small wifebeater t-shirt and blowout hairdo.
Click to expand...

Pussy. :D
 
It's unanimous then..either the d-bag stickers go or you get banned from the forum. :)

Option B - you have to complete this mod.

84.jpg
 
Last edited:
These are some of the best pics of seen of a pani, thanks for posting!

Who's the manuf. of your rear exhaust pipe cover (under the seat area). I've not seen that before.


Red Dawn said:
Does this qualify the thread to be for 1199s that are heavily modified?

Superstock race build. Complete motor tear down and build. From crate to track. Never turned the ignition on after uncrated...

From this:


Fired it up today and will be getting the race plastics mounted and drilled ready for paint...
Click to expand...
 
Last edited:
You guys are ruthless, I took them off. I just thought it was funny, I guess I'm alone in that regard. I left my name on the windscreen, I won't take that off.

I also forgot to mention I removed the chain guard, sprocket cover, and bracket. When I can afford too, I will bet the air ducts in CF and the swing arm cover.

I'm also not sure what a blow out hair do is.
 
Here is mine

BST Carbon Fiber wheels with Ceramic bearings
Termingoni Full exhaust system with satin black ceramic coat inside and out
Ohlins TTX36 MK II
Ohlins FGRT 203 Forks
Ohlins Adjustable Steering Dampener SD040
Shorai Battery
CRG brake and clutch levers
Pro Race Grips 717
Rizoma RRC rear set
Rizoma rear brake fluid tank Red
Rizoma Next front brake fluid tank Red
Rizoma Next clutch fluid tank next Red
Rizoma track 77 turn signals
Rizoma front axle slider
Sato Racing Engine Slider
SpeedyMoto Rear Axle Sliders
Ducati Race Seat
Ducati Fendor eliminator
DP Carbon Fiber Rear Fender
DP Carbon Fiber Front Fender
DP Carbon Fiber Clutch Cover
DP Carbon Fiber Generator Cover
DP Carbon Fiber Swing Arm Guard
DP Carbon Fiber Rear Shock Guard
DP Carbon Fiber key Guard
DP Carbon Fiber Contrails (Air Ducts)
Ducati Tall Windscreen
XeBright HID Kit
AFAM 520 light weight conversion kit 15T steel front /41T aluminum rear
DID ERV3 520 chain
Evotech upper and lower Radiator Gaurd
Evotech bar ends
Shift Tech Carbon Fiber gas cap
SSR Carbon Fiber sprocket Flange cover

IMG_1047.jpg

IMG_1048.jpg

IMG_1049.jpg

IMG_1054.jpg

IMG_1056.jpg

IMG_1057.jpg

IMG_1059.jpg

IMG_0675.jpg
 
Last edited:
Very very nice bike ScrapperX. That black ceramic full Termi looks great, even the engine heat shields and Termi heat guards look good on your bike. Nice touch with the Red Rizoma tanks.
 

Similar threads

M
Panigale V4 RG
Replies
1
Views
73
Motosurgeon
M
AndrewW12
Panigale 1199s tricolore edition
Replies
0
Views
53
AndrewW12
AndrewW12
J
2024 Ducati V2 Bayliss Edition
Replies
1
Views
165
Tech Admin
T
R
Panigale 1199 base
Replies
0
Views
37
RB18
R
Trauma
2012 Panigale 1199 ABS
Replies
0
Views
51
Trauma
Trauma

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top